220-1101 Exam Dumps - CompTIA A+ Certification Exam: Core 1

Cat 5 cable is limited to a maximum data transfer rate of 100Mbps, while Cat 5e, Cat 6, and Cat 6a cables support Gigabit Ethernet (1000Mbps) and higher speeds. Even though the LAN card is capable of Gigabit speeds, it cannot achieve that speed when using a Cat 5 cable. Upgrading to a Cat 5e or higher cable would allow the computer to achieve Gigabit speeds. References: CompTIA A+ Certification Exam: Core 1 - Page 196

The MOST efficient next step the technician should complete is to check the printer paper path to locate any obstructions1. The error message “Paper Jam, Jam in fuser” indicates that there is a paper jam in the fuser2. The fuser is one of the parts of a laser printer most likely to fail without giving any explicit message2. 

The printer LCD screen indicates a paper jam in the fuser. The most efficient next step the technician should complete is to check the printer paper path to locate any obstructions. Applying a maintenance kit or replacing the fuser may not be necessary if the issue is caused by a paper jam.

ADF/flatbed scanner would most likely be used to obtain electronic images of a large number of printed documents. References: CompTIA A+ Certification Exam Guide, Exam 220-1001, Page 351

Based on the information provided in the question, the MOST likely component that needs to be replaced is A. power adapter. If a laptop has been working as expected for several years but suddenly stops working when it is plugged into a wall outlet, it is possible that the power adapter has failed and is no longer able to provide power to the laptop. In this case, replacing the power adapter would likely resolve the issue.

The other components listed in the options (battery, system fan, and hard drive) could also potentially fail and cause issues with a laptop’s performance. However, based on the specific scenario described in the question (the laptop suddenly stops working when plugged into a wall outlet), it seems most likely that the issue is related to the power adapter.

If the laptop has been working as expected for several years and suddenly stops working, the power adapter is the most likely component that needs to be replaced. Over time, the power adapter can become worn or damaged, resulting in a loss of power to the laptop. References: CompTIA A+ Certification Exam Guide, Ninth Edition, Chapter 3

The message stating that one or more disks are in a degraded state is a clear indication of a RAID failure. RAID stands for Redundant Array of Independent Disks, and it is a technology used to provide fault tolerance and improve performance by combining multiple hard drives into a single logical unit.

The message indicating that the OS is missing is most likely caused by a bootable device not found. This means that the server is unable to boot from the designated boot device, which could be the hard drive, a CD/DVD drive, or a USB flash drive. This could be caused by a faulty boot device, a loose cable, or a misconfiguration in the BIOS or UEFI settings.

A Wi-Fi analyzer is a tool that can be used to scan the local area for available wireless networks and can provide information such as signal strength, interference, and available channels. It can also be used to locate the best channel to use for a given access point, which can help to reduce latency and improve performance.

A private cloud deployment model provides the company with complete control over how the data is managed. This is because a private cloud is managed solely by the organization and resides on-premises or in a data center. Therefore, a private cloud deployment model is the best option for this scenario.

If a laser printer is producing output with duplicate images (also known as ghost images), it could be due to an issue with the toner drums and rollers. The first step to eliminate the ghost images would be to clean the toner drums and rollers to remove any excess toner that may be causing the issue.

Ghost images are a common issue in laser printers where an image or text from a previous page appears faintly on subsequent pages. The cause of this issue is usually due to toner residue on the drum or rollers, which can be removed by cleaning the toner drums and rollers. References: Study Guide Section 4.6 - Printer technologies