Note! Following H12-261_V3.0 Exam is Retired now. Please select the alternative replacement for your Exam Certification.

H12-261_V3.0 Exam Dumps - HCIE-Routing & Switching (Written) V3.0

Go to page:

<< First
Prev
1
2
3
4
5
6
7
8
9
Next
Last >>

Question # 17

Adjust IS-IS What is the command for the interface link cost value? (single choice)

isis cost

isis timer hello

isis circuit-type

isis circuit-leve1

Full Access

Question # 18

The DHCPv6 server supports providing the host with other configuration information such as the DNS server address.

TRUE

FALSE

Full Access

Question # 19

After the establishment of the RPT village, what is the wrong description about the SPT switching?

The SPT path is the shortest and the forwarding performance is better

The RPT tree may not be the optimal path for group insertion traffic forwarding

All multicast traffic passes through the RP router, and the RP router may become the bottleneck of data forwarding

After the SPT switching is completed, the multicast traffic still passes through the RPT tree

Full Access

Question # 20

As shown in the following figure, part of the LSPs in the LSDB of a router are shown in the first entry in the following figure. Now I have received a new LSP, the second one in the figure below, the following statements are wrong

This router will put the newly received LSP in the LSDB

If it is a broadcast network,The DIS will include the summary information of this LSP in the next CSNP packet.

This router ignores LSPs received from neighbors

If it is a point-to-point network, the router will send PSNP

Full Access

Question # 21

The switches SWA and SWB are connected through two Ethernet links, and the switch SWA has the following interface configurations:

No need to change the current configuration, GigabitEthemnet1/0/1 and GigabitEthernet1/0/2 can join the same aggregation group

Because of the VLA allowed to passN is different, GigabitEthemet1/0/1 Cannot join the same aggregation group as GigabitEthernet1/0/2

After link aggregation is configured on both SWA and SWB, if the switches SWA and SWBopen Kai MSTP, then GigabitEthernet1/0/1 and GigabitEthernet1/0/2 are in the forwarding state of MSTP

Only the GigabitEtheThe configuration of rmet1/0/2 is changed to be the same as that of GigabitEthemet1/0/1, so that the two can join the same aggregation group

Full Access

Question # 22

OSPFv3 Adopted with OSPFv2 The same route advertisement method, in OSPFv3 Area views are advertised through the network command.

TRUE

FALSE

Full Access

Question # 23

ThroughoutHWRun SSM on an IP multicast network. The following is correct about SSM understanding? (multiple choice)

No RP required

SSM only uses shared trees

SSM uses STP tree only

Best for1-to-many application

SSM is recommended in networks with multiple sources and a desire to minimize in Use when the state of the route

Best for many-to-many applications

Full Access

Question # 24

In order to allow routers at both ends of an IPv6 over IPv4 manual tunnel to exchange routing information, OSPFv3 can be enabled on the tunnel, OSPFv3 will be able to form a neighbor relationship normally, and the tunnel interface will be regarded as a P2P link interface.

TRUE

False

Full Access

Go to page: