4A0-C02 Exam Dumps - Nokia SRA Composite Exam

64496 64497

64496

64497

64497 64497

The BGP session from PE to P is not operational

The BGP session between PEs is operational

The BGP session between PE and CE is not operational

The BGP session from PE to CE is operational

The BGP session between PEs is not operational

P devices participate in service provider core routing.

P devices are not required to be MPLS-enabled.

P devices must be aware of the VPRNs.

P devices must support MP-BGP.

When the P receives the route from the PE.

When the PE populates the route received from the CE into the VRF.

When the PE propagates the route to the CE.

When the PE exports the route from the VRF into the MP-BGP table.

The PE will install a maximum of 40 prefixes into the customer vrf and generate a log message when 40 routes are received

The PE will install a maximum of 40 prefixes into the customer vrf, and generate a log message both when 30 and 41 routes are received

The PE will install a maximum of 40 prefixes into the customer vrf, generate a log message when 10 routes are received and disable learning of new routes at 41

The PE will install a maximum of 40 prefixes into the customer vrf, generate a log message when 10 routes are received and drop the connection at 41

The PE will install a maximum of 40 prefixes into the customer vrf, generate a log message when 4 routes are received and disable learning of new routes at 41

The As-Path is not present as it was removed with the s-override configuration command

The As-Path is not present as it was removed with the o-as-path configuration command

The As-Path is not present as a policy was configured to set it to the null value

The As-Path is not present as VPN-IPv4 routes do not propagate the IPv4 As-Path BGP attribute

Logical Partitioning of route reflectors works best when PEs are partitioned to support different VPRNs.

Logical Partitioning of route reflectors is simple and scalable, but requires more hardware.

Filtering at route reflectors requires either inbound filtering at the route reflector or outbound filtering at the PE routers.

Filtering at route reflectors allows the route reflector to filter routes received from PEs and only accept routes with a certain route distinguisher.

On the CE under the RIP context

On the PE under the BGP context

On the PE under the RIP context

On the CE under the BGP context

This policy is not required