CDCP Exam Dumps - Certified Data Centre Professional (CDCP)

The minimum clearance space required below water sprinkler heads and nozzles of gas-based fire suppression systems is 46 cm / 18 inches, according to the CDCP Preparation Guide1 and OSHA regulation 29 CFR 1910.159 © (10)2. This clearance space is necessary to ensure that the sprinkler spray or gas discharge can reach the fire and cover the protected area effectively. Any material or obstruction below this clearance space can interfere with the sprinkler or gas distribution and reduce the fire suppression performance. Therefore, building owners and managers should ensure that all storage and objects in the data centre are kept below this clearance space, and that the clearance space is maintained at all times.

References:

1: CDCP Preparation Guide, page 24, section 2.4.3 2: Clarification of OSHA regulation 29 CFR 1910.159©(10), Sprinkler …3, page 1, section 1

The four main components of a refrigeration circuit are the evaporator, the compressor, the condenser, and the expansion valve, according to the CDCP Preparation Guide1 and various web sources234. A refrigeration circuit is a system that transfers heat from a low-temperature region to a high-temperature region, using a working fluid called refrigerant. The refrigeration circuit operates in a closed loop, where the refrigerant changes its state from liquid to vapor and back to liquid, while absorbing and releasing heat. The four main components of the refrigeration circuit perform the following functions:

•The evaporator is a heat exchanger that absorbs heat from the low-temperature region, such as the data centre room, and transfers it to the refrigerant. The refrigerant enters the evaporator as a low-pressure, low-temperature liquid, and leaves the evaporator as a low-pressure, low-temperature vapor.

•The compressor is a mechanical device that increases the pressure and temperature of the refrigerant vapor. The refrigerant enters the compressor as a low-pressure, low-temperature vapor, and leaves the compressor as a high-pressure, high-temperature vapor.

•The condenser is another heat exchanger that releases heat from the refrigerant to the high-temperature region, such as the outside air or water. The refrigerant enters the condenser as a high-pressure, high-temperature vapor, and leaves the condenser as a high-pressure, low-temperature liquid.

•The expansion valve is a device that reduces the pressure and temperature of the refrigerant liquid. The refrigerant enters the expansion valve as a high-pressure, low-temperature liquid, and leaves the expansion valve as a low-pressure, low-temperature liquid. The expansion valve also controls the flow of the refrigerant into the evaporator, depending on the cooling load.

References:

1: CDCP Preparation Guide, page 19, section 2.3.3 2: The Refrigeration Cycle5, page 1, section 1 3: Fundamentals of Cooling in Data Center6, page 1, section 1 4: The Refrigeration System, Its Four Main Components, And Their Functions7, page 1, section 1

The UPS (uninterruptible power supply) is a device that provides backup power to the ICT equipment in case of a power outage or a power quality issue. The UPS should be dedicated to the ICT equipment only, and not to other loads, such as lighting, cooling, or security systems. This is because connecting fluorescent lights to the same UPS as the ICT equipment can cause several problems, such as:

•Reducing the battery runtime of the UPS, which may not be enough to support the ICT equipment until the backup generator kicks in or the utility power is restored.

•Increasing the harmonic distortion of the UPS output, which can affect the performance and reliability of the ICT equipment and the UPS itself.

•Creating electromagnetic interference (EMI) or radio frequency interference (RFI), which can disrupt the communication and data transmission of the ICT equipment.

•Triggering false alarms or tripping the circuit breakers of the UPS, which can cause downtime or data loss.

Therefore, fluorescent lights should not be connected to the same UPS that supports the ICT equipment. Instead, they should be connected to a separate power source, such as the utility power, the backup generator, or a different UPS.

References:

1: CDCP Preparation Guide, page 17, section 2.3.1 2: Data Center Lighting Design Considerations3, page 1, section 3 4: Data Center Lighting Solutions5, page 1, section 1 6: Going beyond energy savings in data centers with LEDs7, page 1, section 2

The fire triangle is a simple model that illustrates the three elements that a fire needs to ignite and sustain: oxygen, heat, and fuel. Oxygen is the oxidizing agent that enables the combustion reaction, heat is the energy source that raises the temperature of the fuel to its ignition point, and fuel is the material that reacts with oxygen and releases heat and light. Removing any one of these elements can extinguish a fire. For example, water can reduce the heat and the oxygen, sand or soil can smother the fuel and the oxygen, and fire extinguishers can displace the oxygen or lower the temperature.

References: EPI Data Centre Professional (CDCP®) Reference Materials, page 66.EPI Data Centre Framework, Module 4: Fire Protection, page 4. 1, 2, 3.

According to the CDCP® Preparation Guide, a natural disaster is a catastrophic event that is caused by natural forces and has a significant impact on human lives, property, and environment. Hurricanes are examples of natural disasters, as they are powerful storms that form over warm ocean waters and produce strong winds, heavy rain, storm surges, and flooding. Grid failure, blackouts, and human error are not natural disasters, but rather man-made or technological disasters that result from failures or errors in human systems or activities.

References: CDCP® Preparation Guide, page 9. Natural Disaster Readiness for Data Centers. EM-DAT - The international disaster database. PDC Global - Pacific Disaster Center.