D-PDD-DY-23 Exam Dumps - Dell PowerProtect DD Deploy 2023

If backups are failing when using a dynamic interface group, one of the likely causes is that DD Boost is disabled. Since DD Boost is essential for optimized data transfer during backups, its disabled status would lead to backup failures even if other configurations appear correct.

If you need to verify this in the simulator:

Go to the Protocols section.

Check the status of DD Boost.

Ensure that DD Boost is enabled to allow backups to proceed successfully.

To configure a new MTree with a specified path and size limit in PowerProtect DD, follow these steps:

Step 1: Access the MTree Management Section

In the DD System Manager interface, locate Data Management in the sidebar.

Select MTree from the dropdown menu to manage MTrees.

Step 2: Create a New MTree

Click on Create MTree or Add MTree (the exact button label may vary).

Set the Path for the MTree as /data/col1/oracle.

Step 3: Set the MTree Size Limit

In the MTree creation dialog, look for an option to set a Quota or Size Limit for the MTree.

Set the Size Limit to 200 TiB to ensure the MTree does not exceed this capacity.

Step 4: Save the Configuration

Confirm and save your settings to create the MTree with the specified path and size restriction.

After these steps, you should have a new MTree at /data/col1/oracle with a maximum allowed size of 200 TiB. Let me know if further assistance is required!

A screenshot of a computer Description automatically generated

To flash an LED on a hard drive and bring a disk back online using the DD System Manager or DDOS CLI, follow these general steps:

Step 1: Identify the Disk

In DD System Manager:

Go to the Hardware section in the sidebar.

Locate the list of disks, and find Disk 1.5 (the offline disk).

In DDOS CLI (if using CLI):

Use the command to list disks and confirm the status of Disk 1.5.

Command example: disk show state or disk show summary.

Step 2: Flash the LED on the Disk

In DD System Manager:

In the Hardware section, select Disk 1.5.

Look for an option like Flash LED or Locate Drive to help identify the physical disk.

Activate the LED flash to identify the disk physically.

In DDOS CLI:

Use the command: disk locate 1.5 to flash the LED for Disk 1.5.

Step 3: Bring the Disk Back Online

In DD System Manager:

After identifying the disk, check for options to Bring Online or Reactivate Disk 1.5.

Select the option to return the disk to operation.

In DDOS CLI:

Use the command: disk unfail 1.5 to bring the disk back online.

Step 4: Verify the Disk Status

Confirm in DD System Manager or by using the disk show state command in CLI that Disk 1.5 is now online and functioning.

After completing these steps, the LED should flash to help locate the disk physically, and then Disk 1.5 will be returned to an operational state. Let me know if you need further guidance!

A screenshot of a computer Description automatically generated

To configure DD Boost on the PowerProtect DD system and create the required user and storage unit, follow these steps:

Enable DD Boost:

Go to the DD System Manager.

Navigate to DD Boost Settings.

Click on Enable to activate DD Boost on the system.

2. Create the User 'ddboost':

Go to Access Management > Local Users.

Click Create to add a new user.

Set the username to ddboost and the password to Password123.

Assign the user management role (the recommended permission for DD Boost users).

Click OK to create the user.

3. Create the Storage Unit 'SU1':

Go to Storage Units in the DD Boost section.

Click Create to add a new storage unit.

Name the storage unit SU1.

Assign the ddboost user to this storage unit for access.

Set any quota limits if required, or leave them as None if no restrictions are needed.

Click Create to finalize the storage unit creation.

After completing these steps, DD Boost will be enabled, and the ddboost user with appropriate permissions will have access to the newly created storage unit SU1.

RADIUS is commonly supported in PowerProtect DD for external authentication, allowing integration with centralized authentication systems for user management and access control.

To configure a user account for Retention Lock Compliance Edition with specific role and password policies on a PowerProtect DD system, follow these steps:

Step 1: Access the User Management Section

In the DD System Manager interface, go to Administration or Users (exact location may vary).

Look for an option to manage user accounts.

Step 2: Create or Verify the Account

If the account asterix1 already exists:

Select the user and edit the properties.

If the account does not exist:

Click on Add User or Create New User.

Enter the Username as asterix1.

Set the Password as password2.

Step 3: Assign the Compliance Role

Ensure that asterix1 is assigned the correct role, which is usually Security Officer or a similar role necessary for Retention Lock Compliance.

This role allows the user to manage and enforce compliance-related settings on the system.

Step 4: Set Password Expiration Policy

Configure the Password Aging Policy:

Set Password Expiration or Maximum Days to 180 days.

Ensure Minimum Days and Warning Days are set as needed or required by the compliance policy.

Step 5: Save and Verify

Save the changes and verify that the account asterix1 is now listed with the appropriate role and password settings.

This configuration ensures that the asterix1 account is in place with the correct permissions and that the password is set to expire after 180 days. Let me know if you need more assistance!

To create a DD Boost storage unit for Veritas NetBackup and give access to a user, follow these steps:

Enable DD Boost (if not already enabled):

Navigate to Protocols in the left sidebar.

Select DD Boost and enable it if it’s currently disabled.

Create a New DD Boost User:

Go to Administration or Users section (location may vary depending on the DD OS version).

Add a new user with the username netbackup_user.

Set a password and assign the necessary permissions, such as Read/Write access.

Create a Storage Unit:

Return to the DD Boost section.

Look for an option labeled Storage Units or Add Storage Unit.

Name the storage unit netbackup_su.

During the setup, ensure that netbackup_user has access to this storage unit by assigning appropriate permissions.

Save and Confirm Settings:

Save the configuration changes.

Verify that netbackup_su is listed as a storage unit and that netbackup_user has access.

After completing these steps, you should have a storage unit named netbackup_su accessible by netbackup_user, configured specifically for use with Veritas NetBackup on your PowerProtect DD system. Let me know if further clarification is needed!

The iDRAC (Integrated Dell Remote Access Controller) for PowerProtect DD appliances is typically set to this default IP address, allowing administrators to access the management interface for remote management and monitoring. This IP address can be changed as needed to fit the network configuration.

To create a new non-admin user and a storage unit for an Oracle department on PowerProtect DD, follow these steps:

Step 1: Create the User "DDBoostOracle"

Navigate to the User Management Section:

Look under Administration or Users in the sidebar (the exact location may vary by DD OS version).

Create New User:

Click on Add User or New User.

Enter Username: DDBoostOracle

Enter Password: Password123

Set Management Role to None.

Set Password Aging Policy:

Set Minimum Days: 0

Set Maximum Days: 180

Set Warn Days: 15

Assign the User to DD Boost Users Group:

Locate the option to assign the user to groups and select the ddboost users group.

Save User Configuration:

Confirm and save the settings to create the user.

Step 2: Create the Storage Unit "SU_Oracle"

Navigate to DD Boost Protocol:

Go to Protocols > DD Boost in the sidebar.

Create a New Storage Unit:

Find Storage Units and select Add Storage Unit.

Name the storage unit as SU_Oracle.

Assign the User to the Storage Unit:

During the creation process or in the access settings of the storage unit, assign DDBoostOracle as the user with access.

Save Storage Unit Configuration:

Confirm and save the configuration to ensure that the new user has access to the storage unit.

This completes the setup for a non-admin user with the specified password aging policy and a dedicated storage unit for the Oracle department. Let me know if additional steps are needed!

Explanation: Best practice for implementing a DD VTL suggests limiting the number of virtual tapes initially and expanding as needed. This approach minimizes management complexity and ensures that resources are allocated efficiently.

Explanation: The ddboost storage-unit create command is used to create a storage unit specifically for DD Boost-enabled backups, facilitating direct backup operations with PowerProtect DD.

Explanation: The FS25 expansion shelf must be cabled on a separate private chain to avoid performance degradation and potential conflicts with other shelf types. This cabling rule ensures optimal data flow and stability within the PowerProtect DD system.

Explanation: PowerProtect DD High Availability configurations are supported on the DD9900 model with a single set of shared storage, ensuring redundancy and failover capabilities, critical for enterprise-level data protection environments.

PowerProtect DD High Availability (HA) configuration provides a continuous availability solution, particularly suited for DD9900 systems. Here are the two key attributes of DD HA:

Single Set of Shared Storage: In the HA configuration, both nodes in the active/standby configuration share the same set of storage. This shared storage ensures that if the active node fails, the standby node can take over without data loss, accessing the same storage seamlessly.

Supported Only on DD9900 Systems: The HA feature is exclusive to high-end PowerProtect DD models, specifically the DD9900. This limitation is due to the hardware requirements needed to support the robust failover and data redundancy capabilities inherent in an HA setup.

A screenshot of a computer Description automatically generated

1. Writes request from the backup software

First, the backup software sends a write request to the DD system.

2. Analyzes data for redundancy and stores new data segments

Next, DDOS analyzes the incoming data for redundancy and stores only the unique data segments to optimize storage.

3. Stores the fingerprints

After deduplication, the system stores the unique fingerprints of the data.

4. Verifies that the checksum that is read back matches the checksum that is written to the disk

This step involves verifying the data integrity by matching the written checksum with the read checksum.

5. Verifies that DDOS can read data from the disk

Finally, the system verifies that the data can be read back correctly from the disk, ensuring the write was successful.

The backup server and media server functions can be performed on a single system.: In many environments, it is possible for a single server to act as both the backup server and the media server, simplifying management and resource allocation.

The media server is used in obtaining and storing backup data.: The primary role of the media server is to handle the actual data transfer, manage backup processes, and store backup data, making it essential for an effective backup solution.

BoostFS (Boost File System) is a specialized Dell EMC technology that integrates with backup applications to enable optimized data transfers to Dell EMC Data Domain systems. BoostFS works effectively with Dell's Avamar backup software, leveraging the Data Domain Boost technology to provide deduplication and improve backup efficiency. The BoostFS integration enables Avamar to utilize features like client-side deduplication, reducing data that needs to be transferred and stored on Data Domain systems, and enhancing performance and storage efficiency.

By using BoostFS with Dell Avamar, users benefit from enhanced backup speeds, optimized network bandwidth, and reduced load on the Data Domain system. The BoostFS integration also supports streamlined management and more effective use of storage resources, which aligns well with Dell EMC's strategy for comprehensive data protection.

PowerProtect DD's DDOS (Data Domain Operating System) supports up to 800 simultaneous CIFS connections, allowing multiple clients to connect and access CIFS shares concurrently. This limit is designed to ensure optimal performance while managing multiple data streams efficiently.

In the DS60 storage shelf, slots are organized into columns and rows for easy identification. The columns are numbered from 0 to 9, indicating 10 slots in total, while the rows are labeled from A to F, indicating 6 rows. This identification scheme helps administrators manage and organize the physical components of the storage system effectively.

In a PowerProtect DD system, when setting up expansion shelves, the cabling follows a specific sequence to ensure proper communication between the controller and the shelves. The host port on the last shelf in the chain is connected to the expansion port of the controller to complete the loop. This ensures that data flows correctly between the controller and all shelves in the chain.

Explanation: PowerProtect DD supports up to 60,000 open CIFS files, ensuring high scalability and performance in file-based data storage. This capability is essential for environments with high file access requirements.

Explanation: When a source system is in restricted mode, certain maintenance tasks, like file system cleaning, are unavailable. This restriction is typically applied during migrations to prevent data inconsistencies, ensuring a smooth transfer of data to the new system.

During the migration process from an older Data Domain system with cloud tier capabilities to a new PowerProtect DD appliance, the source system operates in a "restricted mode." This restricted mode limits specific functionalities, including file system cleaning. File system cleaning is a maintenance operation that reclaims storage by deduplication and cleaning up obsolete data. However, to prevent data inconsistency or interference during migration, this functionality is temporarily disabled on the source system, thus ensuring data integrity until the migration process is completed.

The restricted mode ensures that all critical operations remain stable and predictable on the source system, which is essential for a smooth migration to the new environment.

Explanation: Expiring snapshots and initiating file system cleaning are effective ways to free up space on a full PowerProtect DD system. These actions help reclaim storage by removing old, unneeded data without impacting active backups. When a PowerProtect DD system is full and no further data can be written or deleted, the following actions can be taken to free up space:

Expire Existing Snapshots: This process involves removing old or expired snapshots that are no longer needed, which helps in reclaiming space within the system.

Start File System Cleaning: File system cleaning is a maintenance operation that reclaims unused space by consolidating and removing data that is no longer needed, such as expired or deleted data segments. This process is essential in freeing up capacity when the system is near or at full utilization.

These steps allow administrators to make space available on the system without immediately adding new storage or altering the configuration.