E20-593 Exam Dumps - Specialist - Implementation Engineer - NetWorker Exam
In an EMC NetWorker environment, which access options are required for directed recoveries?
An EMC NetWorker customer wants to exclude all .jpg files from backups for all Solaris hosts. Backups are initiated from both the client and server.
How should this be enforced?
What is the default TCP/IP port used by EMC NetWorker Management Console database process?
An EMC NetWorker administrator wants to move NMC from the server where it is currently installed to a new Windows system. The NMC reporting feature is being used.
What must be installed on the new system, in addition to the Console server software?
In a Dell EMC NetWorker environment, an administrator is planning a backup strategy for both traditional and module backups. What should be considered to avoid backing up the same data twice?
An EMC NetWorker Administrator needs to be able to back up and recover a high density active file system to the backup devices connected to local or remote storage nodes.
You need to integrate snapshot technology on SAP backups in an EMC NetWorker environment. Which module is required?
Which Dell EMC NetWorker resource represents a collection of NetWorker-labeled volumes?
An EMC NetWorker administrator has two Microsoft Exchange servers and one Microsoft SharePoint distributed farm. These reside on an EMC CLARiiON disk array.
The backup administrator has two backup requirements:
(1) Back up both Exchange and SharePoint servers by leveraging Microsoft VSS framework.
(2) Minimize the performance impact caused by backup operation.
What is a recommended backup solution?
In an EMC NetWorker environment, a clone volume (physical tape) required for a recovery is not currently mounted. Which attribute is reviewed first to determine the storage node that will be used for the recovery?
What is the selection hierarchy used in determining to which EMC NetWorker pool data is sent?
What components are included with EMC NetWorker Module for Microsoft Applications?
A EMC NetWorker administrator needs to provide customizable backup reporting, alerting, monitoring, and correlation analysis capabilities across an entire backup environment. Which EMC application should the backup administrator use?
When the EMC NetWorker management console server and the EMC NetWorker server are installed on different hosts, what is required to administer EMC NetWorker server from the EMC NetWorker management console server?
An EMC NetWorker administrator wants to determine the RPC port range for a host.
Which directory contains this information?
In a Dell EMC NetWorker environment, what is the purpose of the ConnectEMC feature?
You are logged in to your Windows-based EMC NetWorker server and are attempting to manually run a backup group on the EMC NetWorker Management Console. You are receiving an error when attempting to manually start the group.
What is the most likely reason for the error?
An administrator added several new LDAP user accounts for backup configuration and monitoring tasks. The LDAP users have been authenticated in NetWorker Management Console (NMC). What must be done so that these tasks can be performed on the Dell EMC NetWorker server?
By default, the EMC NetWorker bootstrap reports are generated and sent automatically to the backup administrator. Which configuration change is required to redirect the reports to the printer?
Which EMC NetWorker feature allows for a failed backup to restart at a known good point prior to the backup failure?
Which EMC NetWorker process keeps the record of the TCP/IP port range that is used by EMC NetWorker processes?
What is integrated with NMDA to provide snapshot-based protection for DB2?
Refer to the exhibit.
A Windows administrator on HostA needs to administer the EMC NetWorker server, ServerX. The administrator will use a web browser to connect to the console server on ServerY and log in to the NetWorker Management Console using the default administrator credentials.
What needs to be included in the Administrator list of the NetWorker server?
An EMC NetWorker backup client contains 650 GB of data in 750,000 files and is presently being backed up by an EMC NetWorker server to a tape library with six tape drives connected to a Fibre Channel switch. Due to the total size of its data and the number of files, the backup cannot complete during the required backup window.
According to EMC best practice, how can this issue be resolved?
You are troubleshooting a problem with EMC NetWorker resources and some of the attributes are not being displayed in NetWorker Administration GUI.
What is done to display the advanced attributes?
Click the Calculator icon in the upper left-hand corner.
In an EMC NetWorker environment, the customer is backing up 500 GB per day. The 500 GB is comprised of 35,000 very large files. According to EMC best practices, approximately how large will the Client File Index (CFI) be?
An EMC NetWorker customer wants to clone save sets from an EMC Disk Library (EDL) to a physical tape library. The customer requires full catalog tracking with minimum SAN utilization.
Which solution best satisfies these requirements?
An EMC NetWorker administrator configures an advanced file type device, setting the device target sessions to two, and max sessions to four. How is data written to the advanced file type device?
When connecting to an EMC NetWorker console server running on Solaris, an error message indicates that a supported version of Java Runtime Environment (JRE) is not installed. You verify that the supported JRE version is already installed on the NetWorker console server. However, the error message remains.
What needs to be done to resolve the problem?
If a Level 5 backup is performed for an EMC NetWorker client, at what level is its Client File Index (CFI) backed up?
When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service must be restarted on the client for the change to take effect?
What combination of simultaneous backups and recoveries is supported when using an advanced file type device in EMC NetWorker?
An EMC NetWorker customer has two LTO-3 tape drives configured on a NetWorker server. One of the two tape drives is dynamically shared with a NetWorker storage node. The other tape drive is statically assigned to the NetWorker server. The shared drive stops functioning on the NetWorker server but continues to function on the storage node.
How many nsrmmd processes need to be running on the storage node?
Which command can be used to recover an EMC NetWorker Management Console database?
A customer has just upgraded their EMC NetWorker server. The upgrade included a new IP address and hostname.
After updating the configuration file on the client, which service should be restarted in order for the change to be recognized?
In an EMC NetWorker environment, the NetWorker server is not part of an enabled backup group. What is the sequence of events when automatic cloning is enabled for a client's backup group?
A client save set is backed up to an EMC NetWorker backup pool and later cloned to a volume in a clone pool. On the volume, what property determines when the volume in the clone pool is a candidate for recycling?
A customer is adding a new jukebox to an EMC NetWorker environment. The jukebox is connected and powered on. The customer powers on the NetWorker server and verifies the new library is visible to the OS. The customer brings up the Device Administration window and verifies the existing jukebox is functioning properly. However when the customer attempts to configure the new library using the Device Administration window function "Configure All Libraries", it fails to configure and instructs the customer that they must use jbconfig to manually configure this library.
What is the most likely reason that the customer is forced to use jbconfig rather than the Device Administration window?
Your Windows environment consists of several EMC NetWorker servers on the same subnet that are responsible for backing up only specific clients for security reasons. You need to change one backup client’s “parent†NetWorker server from NWServer-A to NWServer-B.
Which file do you need to change in order to ensure only NWServer-B can back up this client?