FCSS_NST_SE-7.4 Exam Dumps - FCSS - Network Security 7.4 Support Engineer

diagnose sniffer packet any 'udp port 500'

diagnose sniffer packet any 'lp proto 50'

diagnose sniffer packet any 'udp port 4500'

diagnose sniffer packet any 'ah'

PPP chooses froma group of parallel options lo identity the optimal path tor processing a packet.

Only FortiGate hardware configurations affect the path that a packet takes.

PPP does not apply to packets that are part of an already established session.

Software configuration has no impact on PPP.

Strict RPF is enabled by default.

User B: Fail. There is no route to 95.56.234.24 using wan2 in the routing table.

User A: Pass. The default static route through wan1 passes the RPF check regardless of the source IP address.

User B: Pass. FortiGate will use asymmetric routing using wan1 to reply to traffic for 95.56.234.24.

User C: Fail. There is no route to 10.0.4.63 using port1 in the touting table.

The heartbeat messages can be seen using the command diagnose debug authd fsso list.

The heartbeat messages can be seen in the collector agent logs.

The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.

The heartbeat messages must be manually enabled on FortiGate.

There are 98908 kB o! memory that will never be used.

The user space has 708880 kB of physical memory that is not used by the system.

The I/O cache, which has 641364 kB of memory allocated to it.

The value indicated next to the inactive heading represents the currently unused cache page.

Both IKEv1and IKEv2 share the feature of asymmetric authentication.

IKEv1and IKEv2 have enough of the header format in common that both versions can run over the same UDP port.

IKEv1and IKEv2 use same TCP port but run on different UDP ports.

IKEv1and IKEv2 share the concept of phase1and phase2.

The interlace is part of the OSPF backbone area.

There are a total of five OSPF routers attached to the vorz4 network segment

One of the neighbors has a router ID of 0.0.0.4.

In the network connected to port4, two OSPF routers are down.

The miglogd daemon is running on CPU core ID 0.

The diagnose sys top command has been running for 18 minutes.

The miglogd daemon would be on top of the list, if the administrator pressed m on the keyboard.

The cmdbsvr process is occupying 2.4% of the total user memory space.

If the neweli daemon continues to be in the R state, it will need to be manually restarted.

The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.

The TCP connection with BGP neighbor 100.64.2.254 was successful.

The local FortiGate has received 18 packets from a BGP neighbor.

The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264