H13-629_V2.0 Exam Dumps - HCIE-Storage (Written)v2.0

In the backup parameter settings "max open files" parameter defines themaximum number of files to be read in parallel per channel, which is the RMAN MAXOPENFILES parameter

"Command line backup" and "Log Backup" select the storage strategy for the database and archive logs, both need to choose the same storage strategy

The "data files per BFS" parameter in the backup parameter settings specifies the number of data files that can be simultaneously written to the same Back Set number

To achieve Oracle RAC table-level recovery, the backup parameter settings must be in the"option" tab check the "enable table browse "option

Source LUN: 1 and 3Destination LUN: 2 and 4

Source LUN: 1 and 4Destination LUN: 3 and 2

Source LUN: 3 and 1Destination LUN: 4 and 2

Source LUN: 2 and 4Destination LUN: 1 and 3

Because computing tasks are designed for large file services, it is more appropriate to deploy with an 8-node OceanStor 9000 C node. The capacity on the use of 4TB SATA, to meet customer needs

Using Oceanstor 9000 C Node combined with the total bandwidth and total capacity requirements, consider the 8-node configuration 4TB SATA full disk, backend 10GETOE + front-end IB networking

From the reliability point of view, it is recommended to use the InfoEqualizer function to access the OceanStor 9000 storage through a domain name. The InfoEqualizer DNS segment needs to be considered and OceanStor 9000 back-end to interoperability

OceanStor 9000 supports front-end 10GE TOE + back-end IB networking, the front-end is easy to log in and manage with the management PC interworking, considering this networking solution can reduce the cost of front-end IB switches.

windows operating system can create up to 4 partitions

Single partition capacity size limit of 1TB

The total number of primary partitions and main expansion partitions does not exceed 4 and the maximum number of primary partitions 4

The maximum number of logical partitions on the main extended partition does notexceed 4

The client must also support the SMB3.0 protocol

Ifthe client has only one network port, you can not use the SMB3 function

If the client has a GE network port with the same type and number of ports, when the client uses SMB3 to access Huawei OceanStor 900, the client will establish multiple connection channels with Huawei OceanStor 9000

If the client has two or more GE and 10GE IB ports of the same type, after the SMB3 is applied, when one of them is disconnected from the network port, business will be interrupted.

Recovery of the RAID group can be done by recovering the first failed hard disk

Recoveryof the RAID group can not be done by recovering the first failed hard disk

Recovery of the Raid group by recovering the first failed hard disk, the recovered data will be lost for a period of time

Recovering the Raid Group by Recovering the First Erased Hard Disk, the recovered data is not available

TheSIR cluster of the VTL6900 supports global deduplication

The deduplication start time of the VTL6900 can be controlled automatically according to the policy

VTL6900 on the specified tape deduplication and remote replication is recommended at the sametime

VTL6900 deduplicated tape to do data archiving, the physical tape library in the NC is still non-deduplicated data

To prevent changes in the directory or file protection time because of the changes in cluster time, a directory or file is configured with WORM attributes. After the directory or file will use the WORM clock to time, set the WORM clock. When the system will be based on the clock, user’s file will not be modified over the protection period.

If the cluster time is earlier than the WORM clock, the WORM clock will be chased every hour for up to 138 seconds to adjust. If the cluster is after the WORM clock, the WORM clock adjusts to the cluster time.

When a directory is configured as a WORM root directory, all subdirectories, new directories and new files in the directory automatically get the parent directory of WORM attributes. These attribute parameters can only be configured when the WORM root directory is set. Only then the user’s view can not be modified.

WORM logs are used to record the logs related to WORM operations and record them according to the time. The monthly log is a file that can be modified and can delete the file.