LEED-Green-Associate Exam Dumps - LEED Green Associate Exam (LEED GA)

According to the LEED v4 Minimum Program Requirements (MPRs), there is no minimum required number of occupants or full-time equivalents (FTEs) for which a building must be designed to be considered eligible to pursue certification1. However, the project must serve at least one FTE, which is based on an 8-hour day2. The other options are not part of the MPRs.

References:

Minimum Program Requirements (MPRs) - U.S. Green Building Council1

LEED 101: MPRs (Minimum Program Requirements)2

Including subsidies for carpools is a strategy that can increase the number of points the project receives for Location and Transportation credits. This is because it reduces the demand for single-occupancy vehicle trips and parking spaces, which in turn reduces greenhouse gas emissions, traffic congestion, and land consumption12. The project can earn up to 15 points for the Transportation Demand Management credit by providing various incentives and programs to encourage alternative modes of transportation, such as carpooling, public transit, biking, or walking12.

impervious surfaces are those that do not allow water to infiltrate into the soil, such as asphalt, concrete, roofs, or compacted soil. Impervious surfaces increase the amount and speed of stormwater runoff, which can cause erosion, sedimentation, flooding, and pollution of downstream water bodies. Minimizing impervious surfaces can help reduce these negative impacts and preserve the aquatic habitat and natural stream morphology12.

Native vegetation is the plant life that is adapted to the local climate and soil conditions. Native vegetation can help filter pollutants, stabilize soils, reduce runoff, provide shade, and create habitat for wildlife. Enhancing native vegetation can help restore the natural functions and diversity of the ecosystem and protect the aquatic habitat and natural stream morphology13.

Rainwater is the precipitation that falls on the site. Rainwater can be captured and reused for various purposes, such as irrigation, toilet flushing, or cooling. Capturing and reusing rainwater can help reduce potable water demand, decrease stormwater runoff, and prevent flooding and pollution of downstream water bodies. Capturing and reusing rainwater can help conserve water resources and protect the aquatic habitat and natural stream morphology1 .

These strategies are consistent with the LEED v4 requirements for the Sustainable Sites credit category, which aims to protect and restore habitat, manage stormwater, reduce heat island effects, and promote alternative transportation.

The project team should have selected LEED for Existing Buildings: Operations and Maintenance Rating System, as the operational and maintenance phase has begun for a newly constructed school in operation for one year and undergoing minor improvements. The LEED rating systems are designed to address the specific needs and characteristics of different types of buildings and projects. The project team should choose the most appropriate rating system for their project based on the scope, scale, and goals of the project. The LEED for Existing Buildings: Operations and Maintenance Rating System is intended for buildings that are already in use and want to improve their performance and sustainability through best practices in operation, maintenance, renovation, and occupant engagement1 . References: LEED v4 Green Associate Candidate Handbook1, LEED v4 O+M Reference Guide

Installing new flush valves or flow restrictors is a low-cost strategy to improve water efficiency. These devices reduce the amount of water used in each flush or flow, leading to significant water savings over time. Other strategies like installing subsurface cisterns to collect stormwater, using only compostable toilets throughout the facility, or incorporating an on-site blackwater treatment system can also improve water efficiency, but they typically involve higher upfront costs. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The Facility Manager is typically responsible for monitoring ongoing energy performance over the life of a building. They oversee the operation and maintenance of building systems, including HVAC, lighting, and other energy-using equipment, and can implement energy management strategies to optimize performance. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Utilizing recycled materials achieves the green building objective of minimizing the need for landfills. Recycled materials are materials that have been recovered or diverted from the waste stream and processed into new products or materials. Utilizing recycled materials can reduce the amount of waste that is sent to landfills or incinerators, which can have negative impacts on the environment, such as occupying valuable land, contaminating soil and water, and emitting harmful gases. Utilizing recycled materials can also save natural resources, reduce greenhouse gas emissions, create jobs, and lower disposal costs12. References: LEED v4 Green Associate Candidate Handbook1, EPA’s Recycling Basics2

Installing a bioswale is a design technique that should be used to help prevent stormwater damage to the building and surrounding site. A bioswale is a vegetated channel that conveys stormwater runoff while filtering pollutants, reducing peak flow rates, increasing infiltration, and providing habitat. A bioswale can help prevent stormwater damage by reducing erosion, flooding, sedimentation, and contamination of waterways. The other options are not design techniques that should be used to help prevent stormwater damage to the building and surrounding site. Directing runoff into a stream is a design technique that can cause stormwater damage by increasing the volume and velocity of water entering the stream, resulting in erosion, flooding, sedimentation, and contamination of the stream. Paving the site with high Solar Reflectance Index (SRI) material is a design technique that can reduce the heat island effect by reflecting more solar radiation than conventional paving materials, but it does not prevent stormwater damage as it does not reduce runoff or improve water quality. Paving the site with impervious material is a design technique that can cause stormwater damage by preventing infiltration and increasing runoff, resulting in erosion, flooding, sedimentation, and contamination of waterways. References: LEED Green Associate Candidate Handbook, page 32; USGBC [Sustainable Sites], page 4-5.