NS0-163 Exam Dumps - NetApp Certified Data Administrator ONTAP Professional
What needs to be enabled on an ONTAP SMB share to increase data throughput and fault tolerance for Microsoft SQL Server databases?
In a fabric-attached MetroCluster, a "site failure" is described as a __________.
You are troubleshooting a clustered failover problem at a customer site. The customer explains that both storage appliances were NFS mounted onto the Solaris host. You attempt to create a file on the NFS mount point for the inaccessible appliance, but you get the following error:NFS server filer2 not responding still trying.Symptoms:
1) When not in takeover mode, both storage appliances operate normally.
2) In takeover mode, the taken over node is not accessible on the network.You perform a "cf giveback" and you can now create a file over NFS on both appliances.
What should vou do first to resolve this issue?
What should be done to non-distuptlvely correct capacity Imbalances in a FlexGroup?
An administrator enables the NFS protocol on an SVM and creates a volume to be used as a datastore in a VMware environment. After a rescan, the volume is not visible on the ESXi hosts.
What must the administrator validate to resolve this problem?
Which OSSV package would you use to perform an OSSV unattended installation?
Before enabling an active/active configuration, you should verify and compare the configuration of the nodes. Which tool can perform this task?
Which option of the snap restore command allows you to specify a different directory, as long as the directory already exists?
Identify the two commands that could be entered on a system with a SnapMirror source. (Choose two.)
Which one of the following commands is used to specify the destination appliance(s) that are allowed to replicate (pul data from the source appliance?
To restore a qtree protected with SnapVault from the secondary storage system to the primary storage system, you can ______________. (Choose two.)
Which one of the following /etc/snapmirror.conf entries will not support synchronous SnapMirror?
Which native ONTAP feature allows an administrator to block a Windows user from writing files with the.crypto extension?
Which command disables client access to Snapshot copies on a volume called flexvol1?
To restore a primary SnapVault qtree to the exact qtree location on the primary storage system (from which it was backed up), you must:
What is the maximum number of disk shelves per loop in a fabric-attached MetroCluster?
One week ago you performed a single file SnapRestore from a snapshot other than the most recent. You now notice that the storage appliance is now taking longer to perform snapshot deletions. Which one of the following reasons is the most likely cause of this problem?
The two copies of a SyncMirror volume are called_______. Each______is a physical copy of the same file system and consists of one or more RAID groups.
Which tool is available on a non-NetApp primary system to assist in starting or stopping Snap Vault, modifying NDMP settings, enabling debugging, and capturing trace files?
Which three tools present statistics from the Data ONTAP counter manager? (Choose three.)
In a synchronous SnapMirror configuration, the soui'ce storage appliance exhibits high latency due to user traffic and rapid data change from SnapMirror transactions.Which one of the following tuning methods best resolves this performance behavior? Edit the /etc/snapmirror.conf file on the destination storage appliance and set:
In which two tools can an administrator identify security vulnerabilities and receive actionable intelligence? (Choose two.)
A mirrored volume has a failed disk, but there are no available spares in the pool from which the degraded plex was built. Data ONTAP will:
An administrator wants to scale out storage performance for real time read-intensive workloads across multiple controllers.
Which two NetApp ONTAP features accomplish this task? (Choose two.)
If you were troubleshooting and wanted to look at SnapMirror log files, what is the path and directory to these files?
Which command displays the disk ownership for both CPU modules in a FAS270C appliance?
A mirrored volume has a failed disk, but there are no available spares in the pool from which the degraded plex was built. Data ONTAP will:
How can you "throttle" Snap Vault updates and baseline transfers so that the primary or secondary is not transmitting data as fast as it can?
Which one of the following would you use to change the NDMP password on the Open System SnapVault agent?
Which SyncMirror command mirrors an existing unmirrored aggregate where Data ONTAP selects the disk drives?
The NearStore system is not the recommended secondary storage appliance for Open System SnapVault.
What console message is a good indication that the storage appliance is ready to reinstate the cluster from a previous takeover?
Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
Which two supported methods would you use to restore data from a SnapVault for NetBackup Volume?
Which one of the following commands is used to specify the destination appliance(s) that are allowed to replicate (pull) data from the source appliance?
SnapVaulr snapshots for SnapLock volumes are deleted automatically according to the retention count set in the SnapVault schedule?
Which one of the following commands would you use to rejoin the "mil" volume with the "mir(l)" volume?
Which one of the following statements apply to Advanced Single Instance Storage (ASIS)?
If the local node has its FC HBA connected to switch Bank 1, it owns the disks connected to switch bank
Which NetApp solution enables block-level backup and restore from ONTAP to StorageGRID?
Fill in the blanks for the following statement:
The qtree specified for_____must not exist on the secondary system before you run the_____command.
An aggregate is composed of twelve 36-Gigabyte disks. A drive fails and only 72-Gigabyte spare disks are available Data ONTAP will then perform what action?
After configuring an ONTAP duster for SAN access, the administrator is notified that the cluster nodes are connected to separate fc switches.
Given the following output:
What action will correct the redundancy issue?
In cluster takeover mode, the shared interface assumes the identity of the
You have determined that the failure to a MetroChister is a disaster. Which step should you take?
Which command displays the disk ownership for both CPU modules in a FAS270C appliance?
Which two default HA features work together to reduce and avoid client outages on an ONTAP FAS cluster? (Choose two.)
Which one of the following options will allow a snapmirror storage appliance to mirror from this system?
The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from your primary system.
Node 1 in a clustered pair detects that it has lost connectivity to one of its disk shelves. Node 1 is still up, but it cannot see one of its disk shelves. However, the partner node, Node 2, can see all of Node 1s disk shelves. Which one of the following features will cause Node 2 to monitor this error condition for a period of three minutes (by default), and then forcibly take over Node 1 if the error condition persists?
The Snap Vault secondary system makes a snapshot of its own volume where the qtrees are located.
A True
B. False
Refer to the exhibit.
An administrator creates a new qtree and an associated export policy. When the client tries to connect, they are denied.
What should the administrator do?
For aggregates or traditional volume SyncMirror to work correctly, the configuration of each plex must be identical with regard to____________.
Which one of the following commands or procedures would you use to undo a SnapRestore reversion?
You are trying to do a single file SnapRestore for a file, but you are receiving an error message that the directory structure no longer exists. Which one of the following is the most likely explanation?
Which command displays the disk ownership for both CPU modules in a FAS270C appliance?
Which method should an administrator use to make sure all data In a local tier cannot be read If the underlying device Is repurposed, returned, misplaced, or stolen?