220-1101 Exam Dumps - CompTIA A+ Certification Exam: Core 1

A sandbox is a virtual environment that isolates the engineer’s research activities from the rest of the system. This allows the engineer to test, experiment, and modify the system without affecting the real data, applications, or settings. A sandbox is the best environment for research purposes because it provides a safe and controlled way to explore new ideas, simulate scenarios, and troubleshoot problems. A sandbox can also be easily reset or deleted after the research is done.

References

What is a Sandbox Environment?

Chapter 4: Virtualization and Cloud Computing

The message prompting to press "OK" indicates that the printer is waiting for a user input. This suggests that there is some issue with the printer settings, and the most probable cause is that the default paper type has been changed, and the printer needs the user to confirm the paper type before proceeding with the print job. This is a common issue that can occur when the default paper type is not set correctly or has been changed without the user's knowledge.

A power supply unit (PSU) is a component that converts AC power from the wall outlet to DC power that can be used by the computer components. A PSU has various specifications, such as input voltage, output voltage, wattage, connector type, form factor, and efficiency rating3. In this scenario, the engineer is building a workstation that requires the following components: an ATX motherboard, a multi-core processor, a dedicated graphics solution, a SATA hard drive, and DDR4 memory. The most suitable power supply specification for this workstation is 12V, 500W output. This means that the PSU can provide 12 volts of DC power and 500 watts of total power to the components. 12V is the standard output voltage for most modern PSUs, and it is compatible with the ATX motherboard and the SATA hard drive4. 500W is a sufficient wattage for a workstation that has a multi-core processor and a dedicated graphics solution, which are power-hungry components5. The other power supply specifications are not suitable for this workstation because:

•SFX, 18-pin connector is a form factor and a connector type that are not compatible with the ATX motherboard, which requires an ATX form factor and a 24-pin connector6.

•DC input is a type of input voltage that is not common for desktop PSUs, which usually use AC input from the wall outlet.

•Type A socket is a type of AC power plug that is used in North America and Japan, but it is not a power supply specification.

References

3: What Power Supply Do I Have: Quick Ways to Find Your PSU Specs

4: Power Supply 101: A Reference Of Specifications

5: How to Choose the Right Power Supply for Your PC

6: SFX vs ATX PSU: What’s the Difference?

AC vs DC Power Supply: What’s the Difference?

AC power plugs and sockets - Wikipedia

The correct answer is C. DSL.

DSL stands for Digital Subscriber Line, which is a technology that delivers internet over a copper medium, such as a telephone line. DSL uses different frequencies than voice calls, so it can provide both internet and phone service simultaneously. DSL can offer faster speeds than dial-up, but it depends on the distance from the service provider and the quality of the copper line .

The other options are not technologies that deliver internet over a copper medium. ONT stands for Optical Network Terminal, which is a device that converts optical signals from a fiber optic cable to electrical signals for a copper cable or a wireless router. ONT is used for fiber-to-the-home (FTTH) internet service, which delivers internet over a fiber optic medium. SDN stands for Software Defined Networking, which is a technology that allows network administrators to manage and control network resources and traffic using software applications. SDN is not related to the physical medium of internet delivery, but rather to the logical layer of network configuration and optimization. WISP stands for Wireless Internet Service Provider, which is a company that delivers internet over a wireless medium, such as radio waves or microwaves. WISP can provide internet access to rural or remote areas where wired connections are not available or feasible.

An overheating processor is the most likely cause of a computer that has a loud system fan and randomly freezes and reboots. A processor generates heat when it performs calculations, and if the heat is not dissipated properly, it can damage the processor or cause it to malfunction. A loud system fan indicates that the fan is working harder to cool down the processor, but it may not be enough to prevent overheating. A computer that freezes and reboots randomly is a common symptom of an overheating processor, as the system tries to protect itself from further damage by shutting down or restarting.

The other options are not as likely to cause these issues. A failing hard drive may cause data loss, corruption, or slow performance, but it does not affect the system fan or the processor temperature. A defective power supply may cause the computer to shut down unexpectedly, but it does not cause the system fan to be loud or the processor to overheat. Incompatible hardware may cause the computer to fail to boot, display errors, or crash, but it does not cause the system fan to be loud or the processor to overheat.

To troubleshoot and resolve an overheating processor issue, the technician should check and clean the air vents, provide proper ventilation, apply thermal paste, replace the fan or the heat sink, or upgrade the processor if necessary. The technician should also update the BIOS and the device drivers, adjust the power settings, and monitor the system temperature using diagnostic tools.

References:

CompTIA A+ Certification Exam Core 1 Objectives1

The Official CompTIA A+ Core 1 Student Guide (Exam 220-1101) eBook2

How to Troubleshoot Fan Issues | Dell US3

Why your laptop fan is loud and how to fix it | Asurion4

HP Notebook PCs - Fan is noisy and spins constantly (Windows)5

The correct answer is B. Analyze the error logs.

Error logs are files that record the events and errors that occur on a server or a network device. They can provide valuable information about the cause and the time of the outage, as well as any warnings or alerts that preceded it. Analyzing the error logs can help the administrator narrow down the possible sources of the problem and identify the best course of action to resolve it.

The first step in troubleshooting a network is to identify the problem1. As a part of this step, the administrator should gather information about the current state of the network using the network troubleshooting tools that are available1. One of these tools is the error log viewer, which can be accessed through the server’s operating system or a network monitoring software. The administrator should look for any entries that indicate a failure, a crash, a timeout, or an exception in the error logs. The administrator should also note the date and time of the entries, as well as the severity and the frequency of the errors.

The other options are less likely to be the first step in troubleshooting, because:

•Documenting the results is an important step in troubleshooting, but it should be done after identifying and resolving the problem, not before. Documenting the results can help the administrator keep track of the actions taken, the changes made, and the outcomes achieved. It can also help prevent future problems by providing a reference for best practices and lessons learned1.

•Checking the physical connections is another important step in troubleshooting, but it should be done after analyzing the error logs, not before. Physical connections are the cables and ports that link the server to other devices on the network. They can affect the quality and stability of the network signal. If the error logs do not indicate any software or configuration issues, then checking the physical connections can help determine if there is any damage or interference in the hardware2.

•Upgrading the server firmware is a possible solution for some network problems, but it should not be done as a first step in troubleshooting, unless there is a clear indication that the firmware is outdated or corrupted. Firmware is a type of software that controls the basic functions of a hardware device. Upgrading the firmware can improve performance, security, and compatibility, but it can also introduce new bugs or conflicts with other software or hardware components. Therefore, upgrading the firmware should be done with caution and only after backing up data and settings3.

For more information and tips on how to troubleshoot network issues, you can visit these links:

•A Guide to Network Troubleshooting - CompTIA

•What is Network Troubleshooting? How to Fix Network Issues - SolarWinds

•Network Troubleshooting - Methodology, Steps & Techniques - DNSstuff

The correct answer is D. Raise the filament flow amount.

Filament flow amount, also known as extrusion multiplier or flow rate, is the setting that controls how much filament is extruded by the nozzle during 3D printing. It is usually expressed as a percentage of the default value, which is 100%. Increasing the filament flow amount means extruding more filament than usual, while decreasing it means extruding less1.

The filament flow amount can affect the quality and adhesion of the first layer, which is crucial for a successful 3D print. If the filament flow amount is too low, the nozzle may not extrude enough filament to fill the gaps between the lines and create a smooth and solid first layer. This can result in poor adhesion, curling, warping, or detachment of the print from the bed12.

To improve adherence on the first layer, the user should raise the filament flow amount slightly, such as 105% or 110%, to ensure that enough filament is extruded to create a strong bond with the bed. The user should also make sure that the nozzle height, bed leveling, and bed temperature are properly calibrated for optimal first layer adhesion12.

The other options are less likely to improve adherence on the first layer, because:

•Lowering the print bed temperature may reduce the adhesion of the TPU filament to the bed, as TPU usually requires a bed temperature between 20-60°C for the best results3. Lowering the bed temperature may also increase the risk of warping or curling of the print4.

•Adjusting the RPM of the cooling fan may not have a significant effect on the first layer adhesion, as cooling fans are not required with TPU3. In fact, using a cooling fan with TPU may cause cracking or delamination of the print, as TPU needs to cool down slowly and evenly4.

•Increasing the print speed may worsen the first layer adhesion, as TPU is a flexible and elastic filament that needs to be printed slowly and consistently. A recommended print speed for TPU is 15-30mm/s3. Increasing the print speed may cause clogging, stringing, blobs, or under-extrusion of the filament4.

For more information and tips on how to 3D print TPU filament like a pro, you can visit these links:

•How to 3D Print TPU Filament Like a Pro – Ultimate Guide & FAQ

•The Complete TPU Filament 3D Printing Guide - 3DSourced

•TPU Filament 3D Printing Material – The Complete Guide

•TPU filament - learn everything about the TPU material for 3D printing

ECC stands for Error Correction Code, which is a type of memory that can detect and correct data errors that may occur during processing or transmission. ECC memory is commonly used in servers that handle sensitive or critical information, such as payment information online, because it can reduce the risk of data corruption, system crashes, or security breaches12.

DDR4 is a generation of DDR technology, which stands for Double Data Rate. DDR4 memory is faster and more power-efficient than its predecessors, but it does not necessarily have ECC functionality. DDR4 memory can be either ECC or non-ECC1.

VRAM is Video RAM, which is a type of memory that is dedicated to storing graphics data for display. VRAM is usually found on graphics cards or integrated graphics processors, not on servers3.

SODIMM is Small Outline DIMM, which is a type of memory module that has a smaller size and lower profile than regular DIMMs. SODIMMs are typically used in laptops, notebooks, or other compact devices, not on servers3.