220-1101 Exam Dumps - CompTIA A+ Certification Exam: Core 1

correct answer is "Overclocking" and "Reduce CPU Clock speed" CPU is at 4.5 Ghz when normal is 3.2 Ghz. Overclocking too much can cause freezes, and this is a gaming computer so the user probably took it too far. http://blog.logicalincrements.com/2018/12/4-troubleshooting-tips-overclocking-pc/

Near field communication (NFC) is a function that enables contactless payments with a phone by allowing it to communicate with compatible devices within close proximity. If NFC is not working properly, the user will not be able to perform contactless payments with the phone. Hotspot is a feature that allows a device to share its internet connection with other devices via Wi-Fi, Bluetooth, or USB. Bluetooth is a wireless technology that allows devices to connect and exchange data over short distances. USB is a standard interface that connects devices such as keyboards, mice, flash drives, etc

Running the printer’s alignment process is the first step that a technician should do to fix the shadowing problem on the printouts. Shadowing is a print quality issue that occurs when the printer prints a faint duplicate image of the original text or graphics, usually slightly offset from the original position. This can be caused by a misalignment of the printhead, which is the part of the printer that sprays ink onto the paper. The printer’s alignment process is a procedure that adjusts the position and angle of the printhead to ensure that the ink is applied accurately and evenly on the paper. The printer’s alignment process can be performed from the printer’s menu, the printer’s software, or the printer’s maintenance tool, depending on the model and type of the printer.

The other options are not the best solutions for this problem. Reseating the new ink cartridges may not solve the shadowing issue, unless the cartridges are not properly installed or recognized by the printer. However, this is unlikely to be the case, as the printer would usually display an error message or refuse to print if the cartridges are not compatible or inserted correctly. Replacing the fuser assembly or installing the maintenance kit are more drastic and expensive measures that are usually done when the printer has more serious problems, such as paper jams, smearing, streaking, or fading. The fuser assembly is the part of the printer that heats and melts the toner onto the paper, and the maintenance kit is a set of components that need to be replaced periodically to keep the printer in good condition. These parts are not directly related to the shadowing issue, and replacing them may not fix the problem.

Calibration is the process of adjusting the printer settings to ensure that the printed output matches the original document. Calibration can fix issues such as misaligned images, color accuracy, and print quality. References: [Printer Calibration]

Using a mobile hotspot can quickly establish an internet connection for the remote user. A mobile hotspot uses cellular data to create a Wi-Fi network that the user can connect to, bypassing the need for a physical connection to the ISP. This solution is practical and efficient, especially in situations where the primary internet connection is down, and immediate connectivity is required. Mobile hotspots are widely used for their convenience and the ability to provide internet access almost anywhere cellular service is available, as highlighted in the CompTIA A+ Core 1 (220-1101) Exam Objectives in sections related to networking and mobile devices .

When a laptop screen fails to mirror to a television despite being correctly connected via an HDMI cable, a common issue is that the television is set to the wrong input source. Modern televisions have multiple input options (e.g., HDMI 1, HDMI 2, AV, etc.), and selecting the correct input that corresponds to the port the HDMI cable is connected to is essential for displaying the laptop's screen. The blinking logo on the TV screen typically indicates that the TV is functioning but not receiving a signal from the selected input source. Changing the TV's input to the correct HDMI port should resolve the issue and allow the laptop screen to mirror onto the TV.

SAS stands for Serial Attached SCSI, which is a type of interface that connects storage devices to servers or workstations. SAS supports both mechanical hard disk drives (HDDs) and solid state drives (SSDs), but not other types of storage devices, such as NVMe M.2, mSATA, or optical drives12.

RAID stands for Redundant Array of Independent Disks, which is a method of combining multiple storage devices into a logical unit that provides improved performance, reliability, or both. RAID 10 is a combination of RAID 1 (mirroring) and RAID 0 (striping), which means that data is written across two or more striped sets of mirrored drives34.

Therefore, the only type of storage device that the technician can install in a server that only has SAS connectors and wants to use RAID 10 is mechanical HDDs. Mechanical HDDs use spinning platters and moving heads to store and access data, and they are usually cheaper and have larger capacities than SSDs, but they are also slower and more prone to failure .