300-430 Exam Dumps - Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Wireless Multicast Forwarding (WMF) is the feature that allows the delivery of multicast content, such as a promotional video, to only interested hosts over a wireless network. It optimizes the use of network resources by ensuring that only the hosts that have expressed interest in the multicast group receive the data.

 In a multicast implementation using multiple multicast groups and PIM routers, the address that provides automatic discovery of the best RP (Rendezvous Point) for each multicast group is 224.0.1.39. This address is used by the Auto-RP feature, which allows for dynamic RP discovery and simplifies the management of multicast groups across the network. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

When designing a high availability wireless network, the focus should be on cell overlap. Adequate cell overlap ensures that if one access point fails, another can provide coverage without service interruption, thus maintaining network resilience and availability. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

Split tunneling on a Cisco Aironet 600 Series OfficeExtend AP allows for traffic to be divided between two different networks. In this case, it enables the user to access the corporate network for work-related tasks while simultaneously allowing them to print to a printer on their home network. This is achieved by routing the traffic meant for the corporate network to the WLC, while local traffic such as the connection to a home printer is kept on the local network. References := CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The FlexConnect AP Upgrade feature allows for a selective upgrade process within a FlexConnect group. By not setting any master APs, the WLC will automatically select one AP of each model with the lowest MAC address to receive the upgrade directly from the controller. This ensures that the upgrade is distributed efficiently across different AP models in the group without manual intervention.

References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)

 In a Cisco WLAN deployment where it is required that all APs from branch1 remain operational even if the control plane CAPWAP tunnel is down, the operational mode that must be configured on the APs is standalone (option B). In standalone mode, the APs can continue to function and provide network access to clients even without a connection to the WLC, which is essential during a WAN failure to headquarters. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, with a focus on AP operational modes and their behavior during network disruptions.

Enabling unicast AP multicast mode can correct the issue of increased controller CPU overhead and overall network utilization after multicast is enabled. This mode allows the controller to send multicast traffic to the APs as unicast, which is more efficient for the wireless medium and reduces the load on the controller’s CPU.

References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

With the implementation of a BYOD policy, the security director should be concerned about malware and lost and stolen devices. Malware can compromise the corporate network if infected devices connect to it. Lost and stolen devices pose a risk of unauthorized access to corporate data and resources, potentially leading to data breaches. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide)