4A0-C01 Exam Dumps - Nokia NRS II Composite Exam

SDPs are a logical way to direct traffic from one router to another.

SDPs are a logical way to direct traffic between services.

SDP IDs are locally unique.

SDP IDs must be unique across the network.

SDPs are specific to one service type

SDPs must use MPLS for their encapsulation

Epipe

Fpipe

Apipe

Ipipe

Cpipe

Gpipe

The Isp-ping tool is used to perform a unidirectional LSP test.

The router 10.10.10.2 is the egress router of the LSP.

The router can reach the far-end of the LSP through an RSVP-TE tunnel.

The router can reach the far-end of the LSP through an LDP tunnel.

LDP must be enabled on both PE routers.

RSVP must be enabled on both PE routers.

Traffic engineering must be enabled in the IGP.

The VC-ID must match between the two PE routers in both directions.

The transport tunnel must be operationally up between the two PE routers in both directions.

The SDP ID must match between the two PE routers in both directions.

A new LDP session is established on R1-R3-R6 as soon as the FIB is updated.

The LDP session remains unchanged until the existing path R1-R2-R4-R6 goes down.

A new LDP session is established on R1-R3-R6 as soon as router R1 receives a new label for router R6.

The LDP session remains unchanged until router R3 stops advertising the maximum metric for the link to router R6.

The MPLS label value may be carried in an ATM header.

The MPLS label value may be carried in a shim header.

The MPLS label value may be carried in an OSPF header.

The MPLS label value may be carried in a Frame Relay header.

Per-platform label space, conservative retention mode

Per-interface label space, conservative retention mode

Per-platform label space, liberal retention mode

Per-interface label space, liberal retention mode

The area ID does not have to match.

The value of the E bit in the options field does not have to match.

The value of the Hello interval does not have to match.

The value of the network mask does not have to match.

The area ID, the E bit value, the Hello interval and network mask must all match.