Which of the following statements are true according to the following configuration of a router?
Huawei]display ospfv3 interface GigabitEthernet 0/0/0 GigabitEthernet0/0/0 is up, line protocol is up
Interface ID 0x3 Interface MTU 1500 IPv6 Prefixes
FE80::2E0:FCFF:FE59:3498 (Link-Local Address)
2004::1/64
OSPFv3 Process (1), Area 0.0.0.0, Instance ID 0
Router ID 10.0.4.4, Network Type BROADCAST, Cost: 1 Transmit Delay is 1 sec, State Backup, Priority 1 Designated Router (ID) 10.0.2.2
Interface Address FE80::2E0:FCFF:FEBB:6CF9 Backup Designated Router (ID) 10.0.1.1 Interface Address FE80::2E0:FCFF:FEC6:4A10
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:05
Neighbor Count is 3, Adjacent neighbor count is 2 Interface Event 2, Lsa Count 4, Lsa Checksum 0xf258
Interface Physical BandwidthHigh 0, BandwidthLow 1000000000
IPsec VPN can only encrypt and trAns mit unicast data, and GRE can encapsulate multicast data
PING 10.0.0.2: 56 data bytes, press CTRL_C to break
Reply from 10.0.0.2: bytes=56 Sequence=1 ttl=128 time=60 ms Reply from 10.0.0.2: bytes=56 Sequence=2 ttl=128 time=40 ms
--- 10.0.0.2 ping statistics --- 2 packet(s) transmitted
2 packet(s) received
0.00% packet loss
round-trip min/avg/max = 40/46/60 ms
The Network Administartor can run the "ping" command on the AR G3 router to test the connectivity to 10.0.0.2. Wh/ich of the following statement is true about the command output?