Winter Sale Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: v4s65

HPE2-T37 Exam Dumps - Using HPE OneView

Question # 4

Your customer wants to deploy HPE OneVlew appliance to manage HPE ProLiant servers. Customer reports that they nave only KVM available What can you tell this customer?

as a hypervisor.

A.

HPE OneView appliance can be deployed to KVM - in addition to VMware ESXi and Hyper.

B.

HPE OneView appliance can be deployed only to the VMware ESXi, and KVM is not supported.

C.

Customer can deploy nested ESXI in a KVM VM. then deploy HPE OneView appliance to the ESXi.

D.

Customer can convert ESXi appliance version and deploy it to the KVM hypervisor.

Full Access
Question # 5

How is HPE Storage Integration Pack for VMware vCenter deployed?

A.

It is deployed as an agent on any supported and managed array.

B.

It |i deployed as a virtual appliance to the supported hypervisor.

C.

It is the part of the standard HPE OneView appliance, but it must be activated.

D.

It is deployed as an application on Windows system running in the virtual machine.

Full Access
Question # 6

What can De defined in a server profile for HPE Superdome Flex?

A.

nPartition configuration.

B.

BMC settings.

C.

Complex firmware baseline.

D.

Ethernet connections.

Full Access
Question # 7

Refer to the exhibit.

After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?

A.

Snapshot functionality will be limited only to the volumes not using these SANs.

B.

Volume presentation through server profile will work with the discovered state.

C.

Auto-zoning functionality will not work until SANs are associated with networks.

D.

Volume provisioning will only work for arrays that ate accessible through these SANs.

Full Access
Question # 8

You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?

A.

to provide static IP addresses to IL0 and interconnect modules if applicable

B.

to provide static IP addresses for an operating system running on a Compute Module

C.

to provide static IP addresses for Logical Interconnects and Logical Enclosures

D.

to provide static IP addresses for storage systems managed in HPE OneView

Full Access
Question # 9

Which operation can be performed using HPE OneView for VMware vCenter Server?

A.

Remove a new node from an existing cluster

B.

Create a new VMware cluster within vCenter Server

C.

Configure VMware cluster properties tor HA and DRS

D.

Create a new distributed switch for cluster connectivity

Full Access
Question # 10

Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?

A.

A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.

B.

A logical JBOD cannot be created during server profile creation and must be prepared in advance

C.

Different types of the drives can be used within a logical JBOD as long as they have the same capacity

D.

Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator

Full Access
Question # 11

Refer to the exhibit.

Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?

A.

There are not sufficient frames for highly available setup.

B.

Some master modules only support a redundant setup.

C.

Firmware on the master modules is too low to support highly available setup.

D.

A dedicated license must be added to HPE OneView to enable this feature.

Full Access
Question # 12

Which component managed using HPE OneView can obtain an IP address from the subnet and address range defined in the HPE OneVlew settings?

A.

Any supported HPE storage array

B.

A Rack Management Controller

C.

An iL0 in an HPE Synergy compute node

D.

An iL0 in an HPE ProLiant server

Full Access
Question # 13

You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.

Click the appropriate configuration option.

Full Access
Question # 14

Which statement about RoCE network restrictions is true?

A.

RoCE networks require Virtual Connect SE 32Gb FC Modules.

B.

RoCE networks cannot be configured when Virtual Connect modules are used.

C.

RoCE networks are supported only when PVLANs are enabled.

D.

RoCE networks are not supported with HPE BladeSystem

Full Access
Question # 15

Your customer would like to use the second mezzanine slot in an HPE Synergy 480 Genii compute node for dedicated FC connectivity. What is required to use the second mezzanine slot For the compute node?

A.

A server profile template must be created.

B.

All memory installed must be the maximum size.

C.

An appropriate HPE OneView license is required.

D.

A second processor must be installed.

Full Access
Question # 16

Which statement about a server profile for an Apollo system is true?

A.

Fibre Channel connections can be defined

B.

UEFI optimized is the only available boot mode

C.

Virtual WWNs and MAC addresses can be defined

D.

Enclosure Group Is automatically selected

Full Access
Question # 17

How can your customer obtain the PowerShell Library for HPE OneView?

A.

It is available for customers with more than 100 compute nodes.

B.

It is a part of the OneView for VMware vCenter Library.

C.

It is available as a part of a service contract for HPE compute nodes.

D.

It can be downloaded from Microsoft PowerShell Gallery.

Full Access
Question # 18

Which HPE compute systems are supported in HPE GreenLake for Compute Ops Management - OneView Edition?

A.

HPE ProLiant G6 and newer systems.

B.

HPE Synergy compute nodes Gen10 or later.

C.

HPE ProLiant Gen10 and newer systems

D.

HPE superdome Flex and Superdome Flex 280

Full Access
Question # 19

Your customer has HPE ProLiant servers deployed and managed using HPE OneView. They plan to add a few HPE Synergy frames to support if realization workload. They plan to manage HPE Synergy frames using HPE OneView.

Which statement about this environment is true?

A.

HPE Synergy frames are managed using HPE Composer 2, which is running an embedded HPE OneView instance.

B.

HPE Synergy frames can be added to an HPE OneView appliance, if they are running HO 6 or iL0 5.

C.

HPE Synergy frames are managed using a Rack Management Controller, not an HPE OneView instance.

D.

HPE Synergy frames can be added to the HPE OneView appliance, used to manage the HPE ProLiant servers.

Full Access
Question # 20

Click the option that will allow you to update the firmware of master and satellite modules.

Full Access
Question # 21

You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?

A.

Logical Enclosure

B.

Logical Interconnect Group

C.

Logical Interconnect

D.

Server Profile

Full Access
Question # 22

Your customer plans to monitor HPE ProLiant DL systems and HPE BladeSystem using HPE OneView Which license is required to accomplish this task?

A.

HPE One View Global Dashboard license

B.

HPE OneView Advanced license

C.

HPE composer 2 license

D.

HPE OneView standard license

Full Access
Question # 23

Which server profile template feature is available only for HPE Synergy compute nodes?

A.

Visualization of MACs and WWNs.

B.

Storage connection management

C.

SAN storage management.

D.

Firmware and drivers update options.

Full Access
Question # 24

Click option that will allow you to select a FlexNIC function for the specified connection.

Full Access
Question # 25

Refer to the exhibit.

Which statement about the logical interconnect shown is true?

A.

For FC uplink sets, an additional uplink from second module should be added for redundancy.

B.

The maximum supported number of the internal networks for logical interconnect is configured.

C.

Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.

D.

FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.

Full Access
Question # 26

Refer to the exhibit.

Which statement about server connections is true?

A.

LACP on downlinks is configured for Ethernet connection

B.

All connections within the server profile are using physical IDs

C.

Ethernet connection is configured to boot from PXE

D.

Storage array is connected directly to an HPE Synergy frame

Full Access
Question # 27

You originally configured boot mode for HPE ProLiant Gen10 server to ‘Legacy BIOS’ in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the ‘UEFI optimized’ to leverage some features provided by this mode.

What must you do next?

A.

reset an il_0 management processor to activate the new boot mode for the server

B.

reinstall an operating system, as UEFI is using different drive format than Legacy BIOS

C.

reset BIOS settings to the defaults so UEFI settings can be applied

D.

reset BIOS settings to the defaults through the server profile after changing the boot mode

Full Access
Question # 28

You are creating a Logical Interconnect Group (LIG) that will be used to configure SAS connectivity. What is the maximum number of frames that can be inducted in this LIG?

A.

2 frames

B.

4 frames

C.

3 frames

D.

1 frame

E.

5 frames

Full Access
Question # 29

Which licenses are optional to be purchased separately for HPE Synergy?

A.

Global Dashboard licenses

B.

FC Upgrade licenses

C.

HPE OneView licenses

D.

Virtual Connect licenses

Full Access
Question # 30

What is the maximum number of HPE Synergy frames that can formulate a single logical enclosure when 25Gb connectivity is used for all HPE Synergy compute nodes?

A.

21

B.

1

C.

3

D.

5

Full Access
Question # 31

Your customer is using HPE OneView to manage HPE ProLian systems. In the same rack they also have two Aruba top-of-rack switches. Your customer wants to visualize the rack system and switches in HPE OneView.

A.

Define the switches as unmanaged devices manually.

B.

Start hardware discovery to add the Aruba switches.

C.

Add the Aruba switches as managed devices in HPE OneVlew.

D.

Add the Aruba switches as monitored devices in HPE OneView

Full Access
Question # 32

You plan to update HPE OneVew to the latest version

What Should you do Mora starting HPE OneView update?

A.

Disable HPE Remote Support at toe HPE OneView appliance level

B.

Put all servers managed through HPE OneView to maintenance state

C.

Run the Update Readiness checker tool to evaluate HPE OneView health status

D.

Create a support dump for the appliance and for all managed logical interconnects

Full Access
Question # 33

Your customer wants to make sure that that each server profiles have only volume defined in the server profile template. When the customer added an extra volume to one of the server profiles, there is no report of inconsistency.

What should be verified?

A.

State of the SAN connections in the server profile.

B.

FC network definition and association with fabrics from SAN manager.

C.

Consistency checking level for SAN storage in the server profile.

D.

Proper array and storage pools licensing in HPE OneView.

Full Access
Question # 34

Which statement regarding HPE GreenLake for Compute Ops Management - OneView Edition requirements is true?

A.

It supports HPE OneView instances from version 8.40 or newer.

B.

It can be used tree of charge for the HPE Synergy platform because the licenses are included.

C.

It is available for customers that have more than three HPE Synergy Frames.

D.

It supports HPE ProLiant G6 and newer systems regardless of the OS installed.

Full Access