ISA-IEC-62443 Exam Dumps - ISA/IEC 62443 Cybersecurity Fundamentals Specialist

Security Levels (SLs) are a way of expressing the security performance of an industrial automation and control system (IACS) or its components. SLs are broken down into three types: target, capability, and achieved1.

• Target SL is the level of security performance that is required for a system or component to protect against a specific threat scenario. The target SL is determined by conducting a risk assessment that considers the likelihood and impact of potential security incidents1.
• Capability SL is the level of security performance that a system or component can provide based on its design and implementation. The capability SL is determined by evaluating the security functions and features of the system or component against a set of security requirements1.
• Achieved SL is the level of security performance that a system or component actually provides in its operational environment. The achieved SL is determined by verifying that the system or component is properly installed, configured, maintained, and monitored1.

References: ISA/IEC 62443 Standards to Secure Your Industrial Control System, page 3-4.

According to the ISA/IEC 62443-3-2 standard, implementing countermeasures is one of the steps in the security risk assessment for system design. The standard defines a comprehensive set of engineering measures to guide organizations through the process of assessing the risk of a particular industrial automation and control system (IACS) and identifying and applying security countermeasures to reduce that risk to tolerable levels. The standard recommends the following steps for implementing countermeasures:

• Establish the risk tolerance: This step involves determining the acceptable level of risk for the organization and the system under consideration, based on the business objectives, legal and regulatory requirements, and stakeholder expectations. The risk tolerance can be expressed as a target security level (SL-T) for each zone or conduit in the system.
• Select common countermeasures: This step involves selecting the appropriate security countermeasures for each zone or conduit, based on the SL-T and the existing security level (SL-A) of the system. The standard provides a list of common countermeasures for each security level, covering the domains of physical security, network security, system security, and application security. The selected countermeasures should be documented and justified in the security risk assessment report. References: ISA/IEC 62443 Cybersecurity Series Designated as IEC Horizontal Standards, Cybersecurity Risk Assessment According to ISA/IEC 62443-3-2

"A common pitfall is to attempt to initiate a CSMS program without at least a high-level rationale that relates cyber security to the specific organization and its mission."

A CSMS program is a Cybersecurity Management System program that follows the IEC 62443 standards for securing industrial control systems (ICS)1. A common pitfall when initiating a CSMS program is D. Immediate jump into detailed risk assessment. This is because a detailed risk assessment requires a clear definition of the system under consideration (SuC), the allocation of IACS assets to zones and conduits, and the identification of threats, vulnerabilities, and consequences for each zone and conduit2. These steps are part of the assess phase of the CSMS program, which is the first phase of the security program development process2. However, before starting the assess phase, it is important to have the management team’s support to ensure the CSMS program will have sufficient financial and organizational resources to implement necessary actions2. Therefore, jumping into detailed risk assessment without having the management buy-in is a common mistake that can jeopardize the success of the CSMS program.

The ISASecure Integrated Threat Analysis (ITA) Program is a certification scheme that certifies off-the-shelf automation and control systems to the ISA/IEC 62443 series of standards1. The ITA Program consists of three main components2:

• Software Development Security Assurance (SDSA): This component evaluates the security lifecycle and practices of the product supplier, such as security requirements, design, implementation, verification, and maintenance. The SDSA certification is based on the ISA/IEC 62443-4-1 standard.
• Functional Security Assessment (FSA): This component verifies the security functions and features implemented in the product, such as identification and authentication, access control, encryption, audit logging, and security management. The FSA certification is based on the ISA/IEC 62443-4-2 standard.
• Communications Robustness Testing (CRT): This component tests the resilience of the product against network attacks, such as denial-of-service, fuzzing, spoofing, and replay. The CRT certification is based on the ISA/IEC 62443-4-2 and ISA/IEC 62443-3-3 standards .

References:

• 1: ISASecure - IEC 62443 Conformance Certification - Official Site
• 2: ISASecure - IEC 62443 Conformance Certification - Official Site
• [3]: ISA/IEC 62443-4-1: Secure Product Development Lifecycle Requirements, ISA, 2018.
• [4]: ISA/IEC 62443-4-2: Technical Security Requirements for IACS Components, ISA, 2019.
• [5]: ISA/IEC 62443-4-2: Technical Security Requirements for IACS Components, ISA, 2019.
• [6]: ISA/IEC 62443-3-3: System Security Requirements and Security Levels, ISA, 2013.

According to the ISA/IEC 62443 standard, the connections between security zones are called conduits. A conduit is defined as a logical or physical grouping of communication channels connecting two or more zones that share common security requirements. A conduit can be used to control and monitor the data flow between zones, and to apply security measures such as encryption, authentication, filtering, or logging. A conduit can also be used to isolate zones from each other in case of a security breach or incident. A conduit can be implemented using various technologies, such as firewalls, routers, switches, cables, or wireless links. However, these technologies are not synonymous with conduits, as they are only components of a conduit. A firewall, for example, can be used to create multiple conduits between different zones, or to protect a single zone fromexternal threats. Therefore, the other options (firewalls, tunnels, and pathways) are not correct names for the connections between security zones. References:

• ISA/IEC 62443-3-2:2016 - Security for industrial automation and control systems - Part 3-2: Security risk assessment and system design1
• ISA/IEC 62443-3-3:2013 - Security for industrial automation and control systems - Part 3-3: System security requirements and security levels2
• Zones and Conduits | Tofino Industrial Security Solution3
• Key Concepts of ISA/IEC 62443: Zones & Security Levels | Dragos4

The primary responsibility of the network layer of the Open Systems Interconnection (OSI) model is to forward packets, including routing through intermediate routers. The network layer is the third layer from the bottom of the OSI model, and it is responsible for maintaining the quality of the data and passing and transmitting it from its source to its destination. The network layer also assigns logical addresses to devices, such as IP addresses, and uses various routing algorithms to determine the best path for the packets to travel. The network layer operates on packets, which are units of data that contain the source and destination addresses, as well as the payload. The network layer forwards packets from one node to another, using routers to switch packets between different networks. The network layer also handles host-to-host delivery, which means that it ensures that the packets reach the correct destination host.

The other choices are not correct because:

• B. Gives transparent transfer of data between end users. This is the responsibility of the transport layer, which is the fourth layer from the bottom of the OSI model. The transport layer provides reliable and error-free data transfer between end users, using protocols such as TCP and UDP. The transport layer operates on segments, which are units of data that contain the source and destination port numbers, as well as the payload. The transport layer also handles flow control, congestion control, and multiplexing.
• C. Provides the rules for framing, converting electrical signals to data. This is the responsibility of the data link layer, which is the second layer from the bottom of the OSI model. The data link layer provides the means for transferring data between adjacent nodes on a network, using protocols such as Ethernet and WiFi. The data link layer operates on frames, which are units of data that contain the source and destination MAC addresses, as well as the payload. The data link layer also handles error detection, error correction, and media access control.
• D. Handles the physics of getting a message from one device to another. This is the responsibility of the physical layer, which is the lowest layer of the OSI model. The physical layer provides the means for transmitting bits over a physical medium, such as copper wire, fiber optic cable, or radio waves. The physical layer operates on bits, which are the smallest units of data that can be either 0 or 1. The physical layer also handles modulation, demodulation, encoding, decoding, and synchronization.

References:

• The OSI Model – The 7 Layers of Networking Explained in Plain English1
• Network Layer in OSI Model2
• OSI model3

 According to the ISA/IEC 62443 Cybersecurity Fundamentals Specialist course, establishing policy, organization, and awareness is one of the four steps of the IACS cybersecurity lifecycle. This step involves defining the cybersecurity policies, roles, and responsibilities, as well as communicating them to the relevant stakeholders. It also involves establishing the risk tolerance level, which is the acceptable level of risk for the organization. Communicating policies and establishing the risk tolerance are both activities that are part of this step. Identifying detailed vulnerabilities and implementing countermeasures are activities that belong to the next steps of the lifecycle, which are assessing the current situation and implementing the cybersecurity program, respectively. References: ISA/IEC 62443 Cybersecurity Fundamentals Specialist course, Module 2: IACS Cybersecurity Lifecycle1

Defense in depth is a concept of cybersecurity that involves applying multiple layers of protection to a system or network, so that if one layer fails, another layer can prevent or mitigate an attack. Defense in depth is based on the principle that no single security measure is perfect or sufficient, and that multiple countermeasures can provide redundancy and diversity of defense. Defense in depth can also increase the cost and complexity for an attacker, as they have to overcome more obstacles and exploit more vulnerabilities to achieve their goals. Defense in depth is one of the key concepts of the ISA/IEC 62443 series of standards, which provide guidance and best practices for securing industrial automation and control systems (IACS). The standards recommend applying defense in depth strategies at different levels of an IACS, such as the network, the system, the component, and the policy and procedure level. The standards also define different zones and conduits within an IACS, which are logical or physical groupings of assets that share common security requirements and risk levels. By applying defense in depth strategies to each zone and conduit, the security of the entire IACS can be improved. References:

• ISA/IEC 62443-1-1:2009, Security for industrial automation and control systems - Part 1-1: Terminology, concepts and models1
• ISA/IEC 62443-3-3:2013, Security for industrial automation and control systems - Part 3-3: System security requirements and security levels2
• ISA/IEC 62443-4-1:2018, Security for industrial automation and control systems - Part 4-1: Product security development life-cycle requirements3
• ISA/IEC 62443-4-2:2019, Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components4