C_ABAPD_2309 Exam Dumps - SAP Certified Associate - Back-End Developer - ABAP Cloud

The statement that can be used to expose the field “connid” of the data source “demo_ods_assoc_spfli” in the element list is A. demo_ods_assoc_spfli.connid,. This statement uses the dot notation to access the field “connid” of the data source “demo_ods_assoc_spfli”, which is an association defined on line #4. The association “demo_ods_assoc_spfli” links the data source “demo_ods” with the table “spfli” using the field “carrid”. The statement also ends with a comma to separate it from the next element in the list12.

You cannot do any of the following:

B. demo_ods_assoc_spfli-connid/: This statement uses the wrong syntax to access the field “connid” of the data source “demo_ods_assoc_spfli”. The dash notation is used to access the components of a structure or a table, not the fields of a data source. The statement also ends with a slash, which is not a valid separator for the element list12.

C. spfli-connid,: This statement uses the wrong data source name to access the field “connid”. The data source name should be “demo_ods_assoc_spfli”, not “spfli”. The statement also uses the wrong syntax to access the field “connid”, as explained above12.

D. _spfli.connid/: This statement uses the wrong data source name and the wrong separator to access the field “connid”. The data source name should be “demo_ods_assoc_spfli”, not “_spfli”. The statement also ends with a slash, which is not a valid separator for the element list12.

References: 1: ABAP CDS - SELECT, select_list - ABAP Keyword Documentation - SAP Online Help 2: ABAP CDS - SELECT, from - ABAP Keyword Documentation - SAP Online Help

The response will be an activation error because the field names of the union do not match. This is because the field names of the union must match in order for the definition to be activated. The union operator combines the result sets of two or more queries into a single result set. The queries that are joined by the union operator must have the same number and type of fields, and the fields must have the same names1. In the given code, the field names of the union do not match, because the first query has the fields carrname, connid, cityfrom, and cityto, while the second query has the fields carrname, carrier_id, cityfrom, and cityto. The field connid in the first query does not match the field carrier_id in the second query. Therefore, the definition cannot be activated.

References: 1: UNION - ABAP Keyword Documentation

The following are the explanations for each statement:

A: This statement is valid. go_ifl may call method ml with go_ifl->ml(). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The interface ifl defines a method ml, which can be called using the reference variable go_ifl. The class cll implements the interface ifl, which means that it provides an implementation of the method ml. The data object go_ifl is assigned to a new instance of the class cll using the NEW operator and the inline declaration operator @DATA. Therefore, when go_ifl->ml() is called, the implementation of the method ml in the class cll is executed123

B: This statement is valid. Instead of go_cll = NEW #(…) you could use go_ifl = NEW cll(…). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The class cll implements the interface ifl, which means that it is compatible with the interface ifl. Therefore, go_ifl can be assigned to a new instance of the class cll using the NEW operator and the class name cll. The inline declaration operator @DATA is optional in this case, as go_ifl is already declared. The parentheses after the class name cll can be used to pass parameters to the constructor of the class cll, if any123

E: This statement is valid. go_ifl may call method m2 with go_ifl->m2(…). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The class cll implements the interface ifl, which means that it inherits all the components of the interface ifl. The class cll also defines a method m2, which is a public method of the class cll. Therefore, go_ifl can call the method m2 using the reference variable go_ifl. The method m2 is not defined in the interface ifl, but it is accessible through the interface ifl, as the interface ifl is implemented by the class cll. The parentheses after the method name m2 can be used to pass parameters to the method m2, if any123

The other statements are not valid, as they have syntax errors or logical errors. These statements are:

C: This statement is not valid. go_cll may call method ml with go_cll->ifl~ml(). This is because go_cll is a data object of type REF TO cll, which is a reference to the class cll. The class cll implements the interface ifl, which means that it inherits all the components of the interface ifl. The interface ifl defines a method ml, which can be called using the reference variable go_cll. However, the syntax for calling an interface method using a class reference is go_cll->ml(), not go_cll->ifl~ml(). The interface component selector ~ is only used when calling an interface method using an interface reference, such as go_ifl->ifl~ml(). Using the interface component selector ~ with a class reference will cause a syntax error123

D: This statement is not valid. Instead of go_cll = NEW #() you could use go_ifl = NEW #(…). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The interface ifl cannot be instantiated, as it does not have an implementation. Therefore, go_ifl cannot be assigned to a new instance of the interface ifl using the NEW operator and the inline declaration operator @DATA. This will cause a syntax error or a runtime error. To instantiate an interface, you need to use a class that implements the interface, such as the class cll123

References: INTERFACES - ABAP Keyword Documentation, CLASS - ABAP Keyword Documentation, NEW - ABAP Keyword Documentation

Based on the following code, the variable type of connection_full is a structure. A structure is a complex data type that consists of a group of related data objects, called components, that have their own data types and names. A structure can be defined using the TYPES statement or based on an existing structure type, such as a CDS view entity or a CDS DDIC-based view. In this case, the variable connection_full is declared using the TYPE addition, which means that it has the same structure type as the CDS view entity /DMO/I_Connection. The CDS view entity /DMO/I_Connection is a data model view that defines a data model based on the database table /DMO/Connection. The CDS view entity /DMO/I_Connection has the following components: carrid, connid, airpfrom, airpto, distance, and fltime. Therefore, the variable connection_full has the same components as the CDS view entity /DMO/I_Connection, and each component has the same data type and length as the corresponding field in the database table /DMO/Connection.

References: CDS Data Model Views - ABAP Keyword Documentation, DATA - ABAP Keyword Documentation, Structure Types - ABAP Keyword Documentation

The access to internal tables can be optimized by using the appropriate table type and specifying the table key. The table key is a set of fields that uniquely identifies a row in the table and determines the sorting order of the table. The table key can be either the primary key or a secondary key. The primary key is defined by the table type and the table definition, while the secondary key is defined by the user using the KEY statement1.

The following results in faster access to internal tables:

B. In a sorted internal table, specifying the primary key completely. A sorted internal table is a table type that maintains a predefined sorting order, which is defined by the primary key in the table definition. The primary key can be either unique or non-unique. A sorted internal table can be accessed using the primary key or the table index. The access using the primary key is faster than the access using the table index, because the system can use a binary search algorithm to find the row. However, the primary key must be specified completely, meaning that all the fields of the primary key must be given in the correct order and without gaps2.

D. In a hashed internal table, specifying the primary key partially from the left without gaps. A hashed internal table is a table type that does not have a predefined sorting order, but uses a hash algorithm to store and access the rows. The primary key of a hashed internal table must be unique and cannot be changed. A hashed internal table can only be accessed using the primary key, not the table index. The access using the primary key is very fast, because the system can directly calculate the position of the row using the hash algorithm. The primary key can be specified partially from the left without gaps, meaning that some of the fields of the primary key can be omitted, as long as they are the rightmost fields and there are no gaps between the specified fields.

E. In a hashed internal table, specifying the primary key completely. A hashed internal table is a table type that does not have a predefined sorting order, but uses a hash algorithm to store and access the rows. The primary key of a hashed internal table must be unique and cannot be changed. A hashed internal table can only be accessed using the primary key, not the table index. The access using the primary key is very fast, because the system can directly calculate the position of the row using the hash algorithm. The primary key can be specified completely, meaning that all the fields of the primary key must be given in the correct order.

The following do not result in faster access to internal tables, because:

A. In a sorted internal table, specifying the primary key partially from the left without gaps. A sorted internal table is a table type that maintains a predefined sorting order, which is defined by the primary key in the table definition. The primary key can be either unique or non-unique. A sorted internal table can be accessed using the primary key or the table index. The access using the primary key is faster than the access using the table index, because the system can use a binary search algorithm to find the row. However, the primary key must be specified completely, meaning that all the fields of the primary key must be given in the correct order and without gaps. If the primary key is specified partially from the left without gaps, the system cannot use the binary search algorithm and has to perform a linear search, which is slower2.

C. In a standard internal table, specifying the primary key partially from the left without gaps. A standard internal table is a table type that does not have a predefined sorting order, but uses a sequential storage and access of the rows. The primary key of a standard internal table is the standard key, which consists of all the fields of the table row in the order in which they are defined. A standard internal table can be accessed using the primary key or the table index. The access using the primary key is slower than the access using the table index, because the system has to perform a linear search to find the row. The primary key can be specified partially from the left without gaps, but this does not improve the access speed, because the system still has to perform a linear search.

References: 1: Internal Tables - Overview - ABAP Keyword Documentation 2: Sorted Tables - ABAP Keyword Documentation : Hashed Tables - ABAP Keyword Documentation : Standard Tables - ABAP Keyword Documentation

A CDS view is a data definition that defines a data structure and a data selection from one or more data sources. A CDS view consists of several parts, but two of them are:

Extension: An extension is an optional clause that allows a CDS view to extend another CDS view by adding new elements, annotations, or associations. The extension clause has the syntax EXTEND VIEW view_name WITH view_name. The first view_name is the name of the CDS view that is being extended, and the second view_name is the name of the CDS view that is doing the extension1.

Field list: A field list is a mandatory clause that specifies the elements of the CDS view. The field list has the syntax SELECT FROM data_source { element_list }. The data_source is the name of the data source that the CDS view selects data from, and the element_list is a comma-separated list of elements that the CDS view exposes. The elements can be fields of the data source, expressions, associations, or annotations2.

The following example shows a CDS view that extends another CDS view and defines a field list:

@AbapCatalog.sqlViewName: ‘ZCDS_EXT’ define view Z_CDS_Extension extend view Z_CDS_Base with Z_CDS_Extension as select from ztable { // field list key ztable.id as ID, ztable.name as Name, ztable.age as Age, // extension @Semantics.currencyCode: true ztable.currency as Currency }

The other options are not parts of a CDS view, but rather related concepts:

Partitioning attributes: Partitioning attributes are attributes that are used to partition a table into smaller subsets of data. Partitioning attributes are defined in the ABAP Dictionary for transparent tables and can improve the performance and scalability of data access. Partitioning attributes are not part of the CDS view definition, but rather the underlying table definition3.

Semantic table attributes: Semantic table attributes are attributes that provide additional information about the meaning and usage of a table. Semantic table attributes are defined in the ABAP Dictionary for transparent tables and can be used to enhance the data modeling and consumption of the table. Semantic table attributes are not part of the CDS view definition, but rather the underlying table definition4.

References: 1: Extending CDS Views | SAP Help Portal 2: SELECT List - ABAP Keyword Documentation 3: Partitioning Attributes - ABAP Keyword Documentation 4: Semantic Table Attributes - ABAP Keyword Documentation

The correct expression to change a given string value ‘mr joe doe’ into ‘JOE’ in an ABAP SQL field list is C. SELECT FROM TABLE dbtabl FIELDS Of1, substring(upper(‘mr joe doe’), 4, 3) AS f2_sub_up, f3,… This expression uses the following SQL functions for strings12:

upper: This function converts all lowercase characters in a string to uppercase. For example, upper(‘mr joe doe’) returns ‘MR JOE DOE’.

substring: This function returns a substring of a given string starting from a specified position and with a specified length. For example, substring(‘MR JOE DOE’, 4, 3) returns ‘JOE’.

AS: This keyword assigns an alias or a temporary name to a field or an expression in the field list. For example, AS f2_sub_up assigns the name f2_sub_up to the expression substring(upper(‘mr joe doe’), 4, 3).

You cannot do any of the following:

A. SELECT FROM TABLE dbtabl FIELDS Of1, upper(left( ‘mr joe doe’, 6)) AS f2_up_left, f3,…: This expression uses the wrong SQL function for strings to get the desired result. The left function returns the leftmost characters of a string with a specified length, ignoring the trailing blanks. For example, left( ‘mr joe doe’, 6) returns ‘mr joe’. Applying the upper function to this result returns ‘MR JOE’, which is not the same as ‘JOE’.

B. SELECT FROM TABLE dbtabl FIELDS Of1, left(lower(substring( ‘mr joe doe’, 4, 3)), 3) AS f2_left_lo_sub, f3,…: This expression uses unnecessary and incorrect SQL functions for strings to get the desired result. The lower function converts all uppercase characters in a string to lowercase. For example, lower(substring( ‘mr joe doe’, 4, 3)) returns ‘joe’. Applying the left function to this result with the same length returns ‘joe’ again, which is not the same as ‘JOE’.

D. SELECT FROM TABLE dbtabl FIELDS Of1, substring(lower(upper( ‘mr joe doe’ ) ), 4, 3) AS f2_sub_lo_up, f3,…: This expression uses unnecessary and incorrect SQL functions for strings to get the desired result. The lower function converts all uppercase characters in a string to lowercase, and the upper function converts all lowercase characters in a string to uppercase. Applying both functions to the same string cancels out the effect of each other and returns the original string. For example, lower(upper( ‘mr joe doe’ ) ) returns ‘mr joe doe’. Applying the substring function to this result returns ‘joe’, which is not the same as ‘JOE’.

References: 1: SQL Functions for Strings - ABAP Keyword Documentation - SAP Online Help 2: sql_func - String Functions - ABAP Keyword Documentation - SAP Online Help