CTFL_Syll2018 Exam Dumps - ISTQB Certified Tester Foundation Level (Syllabus 2018)

The requirement given in the image specifies a field asking for the number of group members, which can be anywhere from 2 to 20 visitors. To test this requirement, we can use boundary value analysis, which is a specification-based test technique that involves testing the values at or near the boundaries of an equivalence partition. An equivalence partition is a set of values that are expected to be treated in the same way by the system under test. For example, based on the requirement, we can identify two equivalence partitions for the input group size:

• EP1: Group size < 2 (invalid)
• EP2: Group size = 2 (valid)
• EP3: 2 < Group size < 20 (valid)
• EP4: Group size = 20 (valid)
• EP5: Group size > 20 (invalid)

The boundary values for each equivalence partition are the values at or near the edges of the partition. For example, the boundary values for EP1 are -1 and 1. The boundary values for EP2 are 1 and 2. The boundary values for EP3 are 2 and 19. And so on.

To test this requirement using boundary value analysis, we need to select one value from each boundary and test it with different combinations of valid and invalid inputs. For example, we can select the following values:

• BV1: Group size = -1 (from EP1)
• BV2: Group size = 1 (from EP1 and EP2)
• BV3: Group size = 2 (from EP2 and EP3)
• BV4: Group size = 19 (from EP3 and EP4)
• BV5: Group size = 20 (from EP4 and EP5)
• BV6: Group size = 21 (from EP5)

We can then create test cases using these values and different combinations of valid and invalid inputs. For example:

• TC1: Group size = -1 -> Invalid input
• TC2: Group size = 1 -> Invalid input
• TC3: Group size = 2 -> Valid input
• TC4: Group size = 19 -> Valid input
• TC5: Group size = 20 -> Valid input
• TC6: Group size = 21 -> Invalid input

Therefore, we need a minimum of 6 valid test cases to achieve 100% boundary value coverage based on input group size.

You can find more information about boundary value analysis in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 4, Section 4.2.

A tool type is a category of tools that have similar features and functions and can be used for similar purposes. A test manager is a person who is responsible for planning, monitoring, controlling, and reporting the test activities and results. A test manager needs to use tools that can help them with these tasks and provide them with useful information and insights. Some examples of tool types that are useful for a test manager are:

• Defect tracking tool: This tool type allows the test manager to record, track, manage, and report the defects found during testing. It also helps the test manager to communicate with developers, testers, and other stakeholders about the defect status and resolution.
• Test management tool: This tool type allows the test manager to organize, manage, and control the test process and its outcomes. It also helps the test manager to define the test strategy, plan the test activities, allocate the test resources, schedule the test execution, monitor the test progress, and evaluate the test results.
• Requirements management tool: This tool type allows the test manager to manage and trace the requirements of the system under test. It also helps the test manager to ensure that the test objectives are aligned with the user needs and expectations and that the test coverage is adequate and complete.

The other tool types mentioned in the question are not as useful for a test manager as they are for other roles or purposes. For example:

• Modeling tool: This tool type allows the user to create graphical or textual representations of software systems or processes. It can be used for design, analysis, simulation, or documentation purposes.
• Static analysis tool: This tool type allows the user to examine the code or design of a software system without executing it. It can be used for finding defects, measuring complexity, checking compliance, or improving quality.
• Coverage measurement tool: This tool type allows the user to measure how much of the code or design of a software system has been exercised by a set of test cases. It can be used for evaluating the effectiveness or completeness of testing.

You can find more information about tool types in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 61.

The ‘Standard for Software Test Documentation’ specification (IEEE 829) is a standard that defines a set of documents that can be used to document the test process and its outcomes. The standard provides an outline for each document, specifying its purpose, content, and format. However, the standard does not prescribe how to apply it in different contexts or projects. It is up to each organization or project to decide how to adapt the standard to their specific needs and situation. Therefore, the standard is not a rigid or mandatory requirement that must be followed strictly by all testers. Rather, it is a flexible and adaptable guideline that can be used as a reference or a starting point for creating test documentation regimes. You can find more information about IEEE 829 and test documentation in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 51.

The requirement given in the image specifies an additional fee of $3 that is charged during the weekend, with some exceptions and discounts based on the age of the visitors. To test this requirement, we can use boundary value analysis, which is a specification-based test technique that involves testing the values at or near the boundaries of an equivalence partition. An equivalence partition is a set of values that are expected to be treated in the same way by the system under test. For example, based on the requirement, we can identify the following equivalence partitions for the input age:

• EP1: Age < 0 (invalid)
• EP2: Age = 0 (valid, no charge)
• EP3: 0 < Age < 7 (valid, no charge)
• EP4: Age = 7 (valid, 20% discount)
• EP5: 7 < Age < 13 (valid, 20% discount)
• EP6: Age = 13 (valid, 20% discount)
• EP7: 13 < Age < 65 (valid, full charge)
• EP8: Age = 65 (valid, 50% discount)
• EP9: Age > 65 (valid, 50% discount)

The boundary values for each equivalence partition are the values at or near the edges of the partition. For example, the boundary values for EP3 are 1 and 6. The boundary values for EP4 are 6 and 7. The boundary values for EP5 are 7 and 12. And so on.

To test this requirement using boundary value analysis, we need to select one value from each boundary and test it with different combinations of weekend and weekday. For example, we can select the following values:

• BV1: Age = -1 (from EP1)
• BV2: Age = 0 (from EP2 and EP3)
• BV3: Age = 6 (from EP3 and EP4)
• BV4: Age = 7 (from EP4 and EP5)
• BV5: Age = 12 (from EP5 and EP6)
• BV6: Age = 13 (from EP6 and EP7)
• BV7: Age = 64 (from EP7 and EP8)
• BV8: Age = 65 (from EP8 and EP9)
• BV9: Age = 66 (from EP9)

We can then create test cases using these values and different combinations of weekend and weekday. For example:

• TC1: Age = -1, Weekend = Yes -> Invalid input
• TC2: Age = -1, Weekend = No -> Invalid input
• TC3: Age = 0, Weekend = Yes -> No charge
• TC4: Age = 0, Weekend = No -> No charge
• TC5: Age = 6, Weekend = Yes -> No charge
• TC6: Age = 6, Weekend = No -> No charge
• TC7: Age = 7, Weekend = Yes -> $2.40 ($3 - 20% discount)
• TC8: Age = 7, Weekend = No -> No charge
• TC9: Age = 12, Weekend = Yes -> $2.40 ($3 - 20% discount)
• TC10: Age = 12, Weekend = No -> No charge
• TC11: Age = 13, Weekend = Yes -> $2.40 ($3 - 20% discount)
• TC12: Age = 13, Weekend = No -> No charge
• TC13: Age = 64, Weekend = Yes -> $3
• TC14: Age = 64, Weekend = No -> No charge
• TC15: Age = 65, Weekend = Yes -> $1.50 ($3 - 50% discount)
• TC16: Age = 65, Weekend = No -> No charge
• TC17: Age = 66, Weekend = Yes -> $1.50 ($3 - 50% discount)
• TC18: Age =

66, Weekend = No -> No charge

Therefore, we need a minimum of 18 valid test cases to achieve 100% boundary value coverage based on input age.

$3.01 is not a valid output boundary value because it is not a possible output value based on the requirement. The output values can only be $0, $1.50, $2.40, or $3 depending on the input age and weekend status.

You can find more information about boundary value analysis in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 4, Section 4.2.

The V-model is a development life cycle model that shows the relationship between each phase of development and its corresponding phase of testing. In this model, each level of testing (unit testing, integration testing, system testing, acceptance testing) has a corresponding level of development (component design, component integration, system design, requirements analysis). The model also shows that testing activities should start as early as possible in the development process and that each level of testing should be planned and designed in parallel with its corresponding level of development. Therefore, one of the roles of a tester in a software company that adopts the V-model is to coordinate the test strategy with the project managers who are responsible for planning and managing each phase of development. This role involves defining the scope, objectives, approach, resources, schedule, risks, and deliverables of each level of testing in alignment with the development plan and the project requirements. You can find more information about the V-model and test planning in Software Testing Foundations: A Study Guide for the Certified Tester Exam, Chapter 22.

Testing tools can be used by both developers and testers for different purposes and at different stages of the software development life cycle. For example, developers can use tools such as unit testing frameworks, code coverage tools, debugging tools, static analysis tools, etc., to improve the quality of their code and find defects early. Testers can use tools such as test management tools, test design tools, test execution tools, test data preparation tools, performance testing tools, etc., to support their testing activities and increase their efficiency and effectiveness. The use of testing tools does not necessarily imply test automation, which is the use of software to perform or support test activities that would otherwise require manual intervention. Test automation is a complex and costly process that requires careful planning, design, implementation, maintenance, and evaluation. The use of testing tools also does not change the role of the test team, which is still responsible for defining the test strategy, designing the test cases, analyzing the test results, reporting the defects, etc. You can find more information about testing tools and test automation in A Study Guide to the ISTQB® Foundation Level 2018 Syllabus, Chapter 61.

A use case is a description of how a user interacts with a system to achieve a goal or perform a task. A use case typically consists of a sequence of steps or actions that the user and the system perform to complete the goal or task. A use case can be used as a basis for designing test cases that verify the functionality and usability of the system under test. A test sequence that represents a possible use case should follow the logical order and flow of the user-system interaction and cover the main scenario and possible variations or exceptions. For example, based on the test cases given for a Library Management System, we can identify the following use cases:

• UC1: Add a new borrower to the system
• UC2: Update a borrower’s data
• UC3: Remove a borrower from the system
• UC4: Loan a book to a borrower
• UC5: Return a book from a borrower
• UC6: Reserve a book for a borrower
• UC7: Send “reservation ready” message to a borrower

The test sequence that represents a possible use case is D. 1-2-6-7-4-5-3. This test sequence follows the logical order and flow of the user-system interaction and covers the main scenario and possible variations or exceptions. For example:

• TC1: Add a new borrower to the system -> This is the first step of the use case, where the user registers as a new borrower in the system.
• TC2: Update a borrower’s data -> This is a possible variation of the use case, where the user updates their personal or contact information in the system.
• TC6: Reserve a book for a borrower -> This is the second step of the use case, where the user reserves a book that they want to borrow from the library.
• TC7: Send “reservation ready” message to a borrower -> This is the third step of the use case, where the system sends a message to the user informing them that their reserved book is ready for pickup.
• TC4: Loan a book to a borrower -> This is the fourth step of the use case, where the user picks up their reserved book from the library and loans it from the system.
• TC5: Return a book from a borrower -> This is the fifth step of the use case, where the user returns their borrowed book to the library and returns it to the system.
• TC3: Remove a borrower from the system -> This is a possible exception of the use case, where

the user decides to cancel their membership and remove their account from the system.

The other test sequences do not represent possible use cases because they do not follow the logical order and flow of the user-system interaction or they do not cover the main scenario and possible variations or exceptions. For example:

• A. 1-4-2-7-5-6-3 -> This test sequence does not follow the logical order and flow of the user-system interaction because it performs some steps before or after they are supposed to happen. For example, it performs TC4 (Loan a book to a borrower) before TC6 (Reserve a book for a borrower), which does not make sense because the user cannot loan a book that they have not reserved yet.
• B. 1-6-2-5-7-4-3 -> This test sequence does not follow the logical order and flow of the user-system interaction because it performs some steps before or after they are supposed to happen. For example, it performs TC5 (Return a book from a borrower) before TC4 (Loan a book to a borrower), which does not make sense because the user cannot return a book that they have not loaned yet.
• C. 1-6-4-7-5-3-2 -> This test sequence does not cover the main scenario and possible variations or exceptions because it omits some steps that are essential for completing or terminating the use case. For example, it omits TC2 (Update a borrower’s data), which is a possible variation of the use case that allows the user to change their personal or contact information in the system.

You can find more information about use cases and test sequences in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 4, Section 4.2.

The fundamental test process activity where the sufficiency of testing and resulting information are assessed is Evaluating exit criteria and reporting. This activity involves checking whether the test objectives have been met and whether there are any unresolved issues or risks that could affect the release or deployment decision. This activity also involves preparing and communicating a test summary report that summarizes the test activities and results and provides recommendations and feedback for improvement. You can find more information about Evaluating exit criteria and reporting in [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus], Chapter 3, Section 3.5.