LEED-AP-O+M Exam Dumps - LEED AP Operations + Maintenance (LEED AP O+M)

For the Location and Transportation Credit, Alternative Transportation, Option 1, all building visitors should be invited to participate in the transportation survey during the survey period. This requirement ensures that the survey data accurately reflects the transportation patterns of not only the regular building occupants but also the visitors, providing a comprehensive view of transportation choices associated with the building.References:LEED AP Operations + Maintenance Reference Guide, Location and Transportation section.

When a building is recertified in LEED Operations and Maintenance, it should use the LEED version that is current at the time of registration for recertification. This approach ensures that the building is being assessed under the most recent standards and requirements, reflecting the latest advancements and best practices in green building.References:LEED Operations and Maintenance Reference Guide, Introduction and Overview section.

When a building initially certified under LEED EB v2.0 seeks recertification, the appropriate version to use is the one that is current at the time of registration for recertification. LEED rating systems go through updates and revisions, and at any given point, they can be either open for registration and certification, closed for registration but open for certification, or completely closed for both registration and certification (sunset). The deadlines for these phases are published by the USGBC. Therefore, a building pursuing recertification must align with the most current version available at the time of its registration for recertification.

Obtaining a response rate of 100% for the occupant comfort survey can qualify for an exemplary performance point under Innovation Credit, Innovation, Option 3. Additional Strategies in LEED. This high level of participation demonstrates exceptional commitment to occupant comfort and well-being, a key aspect of sustainable building design and operation.

Buildings account for 40% of total energy use in the U.S., according to the U.S.Environmental Protection Agency1.This is consistent with the global estimate by the International Energy Agency, which states that buildings and construction sector accounted for 36% of final energy use in 20182.

References: =LEED AP O+M Exam Guide, page 305;LEED v4.1 O+M Reference Guide, page 97.

Buildings are one of the primary consumers of energy worldwide, and they account for a significant percentage of total energy use. The correct percentage is 40%, which encompasses energy used for heating, cooling, lighting, and operating buildings. This figure reflects the extensive impact that building design, construction, and operations have on energy consumption and the potential for energy savings in this sector.

References:

• The figure that buildings account for 40% of total energy use is a commonly cited statistic in the field of sustainability and is mentioned in LEED training materials and documentation. It is a crucial factor that drives the Energy and Atmosphere (EA) category within the LEED rating systems, pushing for strategies that reduce energy consumption and improve building energy performance.

This answer is correct because it follows the guidance provided by the LEED v4.1 O+M Reference Guide for dealing with nonparticipating tenants in multi-tenant buildings. The guide states that if a tenant is unwilling or unable to provide their purchasing data, the project team must integrate the estimated data from the nonparticipating tenant into the whole-building purchasing data to determine compliance for the whole building.The guide also states that the tenant’s purchasing is assumed to be 50% compliant toward the sustainability criteria, unless the project team has a more accurate estimate1. The other options are incorrect because they either make the credit impossible or too easy to achieve, or they do not account for the tenant’s purchasing at all.

References: =LEED v4.1 OPERATIONS AND MAINTENANCE - WAP Sustainability Consulting, page 40;LEED v4: Building Operations + Maintenance Guide | U.S. Green Building Council, page 40.

The correct option regarding project boundaries in LEED is that the gross floor area (GFA) of the LEED project should be no less than 2% of the gross land area within the LEED project boundary. This requirement ensures that the project size is significant enough relative to the land area to make the application of LEED meaningful and impactful.References:LEED AP Operations + Maintenance Reference Guide, Project Site Factorssection.

The correct answer is A because mulching is an environmentally friendly technology for controlling erosion, as stated in the web search results12. Mulching involves applying organic or inorganic materials on the soil surface to protect it from water and wind erosion.Mulching can also conserve soil moisture, moderate soil temperature, and enhance soil fertility2. The other options are incorrect because they either do not control erosion effectively or cause environmental harm.

References: =

• Environment-Friendly Erosion and Dust Control Solutions | GRT, Environmentally friendly erosion and dust control solutions section
• 15 Wonderful Methods to Control Erosion | Earth Eclipse, Applying Mulches section =========================================

Mulching is an environmentally friendly technique used to control erosion by providing a protective layer on the soil surface. This layer helps to reduce the impact of raindrops on the soil, thereby decreasing the potential for soil erosion. Mulch can be made from a variety of organic materials, such as shredded bark, straw, or compost, which not only protect the soil from erosion but also add nutrients as they decompose, improve soil structure, and encourage healthy plant growth. Unlike impermeable solutions like asphalt or temporary solutions like tarpaulin, mulching integrates with the natural environment and supports sustainable land management practices.

CFC-11 was phased out due to the Montreal Protocol because it is a chlorofluorocarbon (CFC) that contributes to ozone depletion. The protocol aimed to phase out substances with high ozone-depleting potential (ODP).

References: The Montreal Protocol on Substances that Deplete the Ozone Layer is a global agreement that regulates the production and consumption of nearly 100 man-made chemicals referred to as ozone-depleting substances (ODS), including CFCs1.