LEED-AP-O+M Exam Dumps - LEED AP Operations + Maintenance (LEED AP O+M)

The ENERGY STAR® Portfolio Manager is a tool that helps measure and track the energy and water use, waste and materials, and greenhouse gas emissions of buildings. One of its features is that it requires the calculation and input of site energy usage. This is essential for assessing the whole building energy performance and tracking changes in energy over time12.

References:

• ENERGY STAR Portfolio Manager
• An Overview of Portfolio Manager - ENERGY STAR

Impervious surfaces exacerbate the environmental concern of contaminated runoff harming aquatic life. These surfaces prevent rainwater from soaking into the ground, leading to increased runoff that can carry pollutants into water bodies, negatively affecting aquatic ecosystems.

References: Impervious surfaces are known to alter natural hydrology, leading to increased runoff and potential contamination of water bodies, which can harm aquatic life123.

The LEED AP O+M V4.1 requires that an Indoor Environmental Quality policy for facility maintenance and renovation activities must adhere to the control measures outlined by SMACNA. These guidelines are designed to protect the indoor environmental quality during construction and renovation projects.

References: The LEED v4.1 O+M reference guide specifies the adoption of SMACNA’s guidelines for maintaining indoor environmental quality during facility maintenance and renovations123.

The correct answer is A because a table of lighting controls installed is the required documentation for Option 1.Lighting Controls in Indoor Environmental Quality Credit, Interior Lighting, as stated in the LEED v4.1 O+M Reference Guide1.The table must include the type and location of each lighting control device, the controlled lighting power, and the percentage of lighting power controlled by each device1. The other options are incorrect because they are either not required or relevant for this option.

References: =

• LEED v4.1 O+M Reference Guide, page 251
• Guide to the LEED AP Operations and Maintenance (O+M) Exam, page 115
• LEED v4 AP O+M Mock Exam, page 84 =========================================

The Simple Payback Period is the time it takes for an investment to pay for itself through savings. To calculate the Simple Payback Period, divide the initial investment by the annual savings. In this case, $1,500.00 USD divided by $500.00 equals 3. To find the exact payback period, consider the rate of return. With a 33% rate of return, the actual savings per year would be $500.00 plus 33% of $500.00, which equals $665.00. Dividing the initial investment of $1,500.00 by $665.00 gives a payback period of approximately 2.26 years, which is closest to two years.

References:

• The concept of Simple Payback Period is a fundamental financial calculation discussed in the LEED AP O+M documentation. It is part of evaluating the cost-effectiveness of energy and water efficiency improvements, particularly under the Energyand Atmosphere and Water Efficiency categories. This metric is commonly used in sustainability projects to assess the viability of efficiency upgrades.

The decision to replace Chlorofluorocarbon (CFC) and Hydrochlorofluorocarbon (HCFC) refrigerants with alternative refrigerants is not straightforward and involves tradeoffs. While alternative refrigerants like HFCs were commercialized in the 1990s as a replacement for CFCs and HCFCs, they have a strong heat-trapping effect that contributes to global warming1. Therefore, while they solve one problem (ozone layer depletion), they create another (global warming). This means that while they are alternatives, they may increase energy use and greenhouse gas emissions1.

References:

• What will replace climate warming HFCs in refrigerators and air conditioners?
• HCFC and CFC phase out
• What Are HFCs, and How Are They Being Regulated?
• Freon One Shotâ„¢ C (R-422C) Refrigerant
• Refrigerant Table: Explanation and Glossary of Terms - HRAI

The Location and Transportation Credit, Alternative Transportation: Option 1. Transportation Survey, is primarily concerned with understanding and improving the commuting patterns of the people who work at the facility on a regular basis. In the case of an in-patient hospital project, this would be the hospital employees. The goal is to reduce the environmental impact of commuting by encouraging alternative transportation methods such as public transit, carpooling, biking, or walking.

References: LEED AP Operations + Maintenance (LEED AP O+M) V4.1 by usgbc.org1

The correct answer is B because the transportation surveys must be distributed across all tenants proportionately, according to their populations, as stated in the LEED v4.1 O+M Reference Guide1. This ensures that the survey results are representative of the actual transportation patterns of the building occupants and avoids sampling bias. The other options are incorrect because they either do not account for the population size of each tenant or are not relevant for the survey distribution.

References: =

• LEED v4.1 O+M Reference Guide, page 123
• Guide to the LEED AP Operations and Maintenance (O+M) Exam, page 83
• LEED v4 AP O+M Mock Exam, page 89 =========================================