UiPath-ADPv1 Exam Dumps - UiPath (ADPv1) Automation Developer Professional Exam

The value that will be displayed in the Output Panel at the end of the sequence is 9. This is because the code in the Invoke Code activity is looping through the array in_numArray and setting the variable out_numVar to the highest value in the array. The array in_numArray has the values {1, 2, 7, 9, 4} as shown in the list of arguments. The variable out_numVar is initialized to 0. The For loop iterates from 0 to the upper bound of the array, which is 4. In each iteration, the If condition checks if the current element of the array is greater than the current value of out_numVar. If it is, then out_numVar is assigned to the current element of the array. Otherwise, out_numVar remains unchanged. Therefore, after the first iteration, out_numVar becomes 1. After the second iteration, out_numVar becomes 2. After the third iteration, out_numVar becomes 7. After the fourth iteration, out_numVar becomes 9. After the fifth iteration, out_numVar remains 9, since 4 is not greater than 9. The Write Line activity outputs the value of out_numVar to the console, which is 9. References: Invoke Code

The out_TransactionItem argument is an output argument of the GetTransactionData workflow, which is used to store the data of the current transaction item1. The REFramework is a template for creating robust and scalable automation projects that uses the State Machine workflow type2. The REFramework is designed for transactional processes, which are processes that handle multiple items of data in a loop3. However, it can also be adapted for linear processes, which are processes that execute a sequence of actions only once.

To use the REFramework for a linear process, the out_TransactionItem argument should be set to Nothing the first time when it enters the Get Transaction Data state. This will ensure that the process will not enter the Get Transaction Data state again, as the condition for the transition from the Get Transaction Data state to the Process Transaction state is out_TransactionItem isNot Nothing1. Setting the out_TransactionItem argument to Nothing will also trigger the End Process state, which will perform the final actions and close the application1.

Option A is incorrect, because the process will enter the Get Transaction Data state even if it is a linear process, as it is the first state in the REFramework. Option B is incorrect, because there is no queue item in a linear process, as there is only one item of data to be processed. Option D is incorrect, because setting the out_TransactionItem argument to a static value will cause the process to enter the Get Transaction Data state repeatedly, as the condition for the transition will always be true.

References: 1: The UiPath ReFramework 2: State Machine 3: Transactional Business Process : [Linear Business Process]

The area selection feature in the UiPath Computer Vision wizard is used to indicate a specific region of the screen that you want to work with. It can be activated by clicking the Indicate on screen button in the CV Screen Scope activity or any other Computer Vision activity that requires a target element. The area selection feature allows you to draw a box around the desired area, and then choose an anchor for it. The anchor is a stable UI element that helps locate the target area at runtime.

The area selection feature is helpful when dealing with multiple fields bearing the same label, such as text boxes, check boxes, or radio buttons. In such cases, the Computer Vision engine may not be able to identify the correct field to interact with, or it may return ambiguous results. By using the area selection feature, you can narrow down the scope of the target element and avoid confusion.

The other options are not correct descriptions of the area selection feature. Option A is false, because the selected area is not treated as a single UI element, but as a region that contains one or more UI elements. The Computer Vision engine still analyzes the contents of the selected area and returns the best match for the target element. Option B is false, because the selected area is not automatically resized to fit all UI elements within it. The selected area remains fixed, unless you manually adjust it. Option C is false, because the area selection feature does not create a duplicate UI, nor does it modify the copy in the automation process. The area selection feature only selects a portion of the existing UI, and performs the specified action on it.

References: Using the Computer Vision activities - UiPath Documentation Portal, Computer Vision activities - UiPath Documentation Portal, Extract multiple words - AI Computer Vision - UiPath Community Forum, Computer Vision Recording - UiPath Community Forum

When using the Type Into activity with the Input Method set to Simulate, the 'Alter disabled element' property should be enabled to execute the activity even if the target UI element is deactivated or read-only.

The Monitoring pages in UiPath Orchestrator are pages that provide information and statistics about the performance and health of your robots, processes, queues, and jobs. You can access the Monitoring pages from the left menu in Orchestrator, under the Monitoring section.

The Include Subfolders filter in the Monitoring pages is a filter that allows you to select whether the contents of the selected folder’s subfolders are displayed in the Monitoring pages. This filter is available when a modern folder is selected from the Folder drop-down list. A modern folder is a type of folder in Orchestrator that supports dynamic and fine-grained permission management, as well as folder-level isolation of data, processes, and execution.

When the Include Subfolders filter is checked, the Monitoring pages display the data for the selected folder and all its subfolders. For example, if you select a modern folder called Sales and check the Include Subfolders filter, the Monitoring pages will show the data for the Sales folder and all its subfolders, such as Sales-East, Sales-West, Sales-North, and Sales-South. This way, you can get a comprehensive view of the performance and health of your robots, processes, queues, and jobs across multiple subfolders.

When the Include Subfolders filter is unchecked, the Monitoring pages display the data only for the selected folder. For example, if you select a modern folder called Sales and uncheck the Include Subfolders filter, the Monitoring pages will show the data only for the Sales folder, excluding its subfolders. This way, you can get a focused view of the performance and health of your robots, processes, queues, and jobs within a specific folder.

The correct answer is B. It allows you to select whether the contents of the selected folder’s subfolders are displayed. This statement accurately describes the functionality of the Include Subfolders filter in the Monitoring pages when a modern folder is selected.

The other options are not correct statements. Option A is incorrect, because the Include Subfolders filter does not allow you to choose between background and foreground processes for the displayed data. Background and foreground processes are types of processes that run in the background or foreground of the robot machine, respectively. You can filter the displayed data by process type using the Process Type filter in the Monitoring pages. Option C is incorrect, because the Include Subfolders filter does not enable you to sort the displayed data based on job priorities. Job priorities are levels of importance that are assigned to jobs when they are created or triggered, such as High, Normal, or Low. You can sort the displayed data by job priority using the Sort By drop-down list in the Monitoring pages. Option D is incorrect, because the Include Subfolders filter does not allow you to allocate licenses per machine for the displayed data. Licenses are resources that are consumed by robots, processes, or users when they perform certain actions in Orchestrator. You can allocate licenses per machine using the License Allocation page in Orchestrator.

References: Orchestrator - Monitoring - UiPath Documentation Portal, Orchestrator - Modern Folders - UiPath Documentation Portal, Orchestrator - License Allocation - UiPath Documentation Portal

Based on the provided screenshot of the Object Repository tree structure in UiPath, the correct hierarchy and count of elements are as follows:

There is one Application, which is "ACME 1.0.0".

Within this application, there are two Screens: "Dashboard" and "Login".

Under the "Dashboard" screen, there are three UI Elements: "User Options", "Users Data".

Under the "Login" screen, there are two UI Elements: "LoginButton", "Password", "Username".

Therefore, the correct option regarding the tree structure displayed would be:

C. One Application Two Screens Five UI Elements

This option correctly identifies one application (ACME 1.0.0), two screens (Dashboard, Login), and five UI elements (User Options, Users Data, LoginButton, Password, Username).

In a UiPath State Machine workflow, the Transitions section of the State activity is used to specify conditional/triggers logic and multiple outgoing transitions in a state machine. Transitions are expanded when you double-click them, just like the State activity. They contain three sections: Trigger, Condition and Action, that enable you to add a trigger for the next state, or add a condition under which an activity or sequence is to be executed. Transitions are represented by arrows or branches between states. They define the flow of the state machine and the rules for moving from one state to another. You can add multiple transitions from a state, but only one transition can be taken at a time, based on the trigger or condition that is met first