H12-811_V1.0 Exam Dumps - HCIA-Datacom V1.0 Exam

Detailed Explanation:Static routing does not automatically recover from link failures; manual reconfiguration is required if a static route path becomes invalid. Dynamic routing protocols, on the other hand, adapt automatically to network changes, adjusting routes as needed. (Reference: HCIA-Datacom Training Material, Static vs. Dynamic Routing)

With a subnet mask of /25, the IP range for this subnet would be 192.168.1.0 to 192.168.1.127. Here, 192.168.1.127 is the last usable address in the subnet, making it a valid host address rather than a network or broadcast address. This address falls within the range of available host addresses for that subnet​.

Detailed Explanation:The Time to Live (TTL) field in an IP packet is decremented by 1 each time the packet passes through a router. When the TTL reaches zero, the packet is discarded to prevent it from circulating indefinitely. (Reference: HCIA-Datacom Training Material, IP Packet Structure)

In STP, the root bridge is elected based on the lowest bridge priority. If there is a tie in bridge priority, the device with the lowest MAC address is selected as the root bridge. This process ensures a stable, predictable root bridge selection in the network​.

The country-code command is used on an AC (Access Controller) to specify the country code, which aligns the wireless settings with local regulatory standards. Setting the correct country code ensures compliance with regional RF (Radio Frequency) regulations, such as frequency bands and transmission power limits​.

In trunk mode, the interface can forward frames tagged with VLANs specified in the allow-pass list (here, VLAN 100) without removing tags. However, if an untagged frame is received, it is assigned to the PVID (here, VLAN 200). This configuration allows both tagged and untagged traffic, with the PVID determining the VLAN for untagged frames​.

Detailed Explanation:

Probe Request: Sent by the client to detect nearby APs.

Probe Response: Sent by APs in response to the client’s request.

Beacon: Periodically broadcast by APs to announce their presence and SSID. The Discovery packet type does not exist in the 802.11 standard.

(Reference: HCIA-WLAN Training Material, WLAN Packet Types)

Detailed Explanation:Access ports are configured for a single VLAN and thus send untagged frames by default. Trunk ports, conversely, handle traffic for multiple VLANs, tagging each frame with a VLAN ID. (Reference: HCIA-Datacom Training Material, Switch Port Types and VLAN Tagging)